¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Unimat
  2. Topics

ER32 Collet on Unimat

 

Does anyone here on this group have any pictures of an ER32 collet mounted on a Unimat spindle?
The ER32 collet is rather large and I would like to see a complete setup.
Carl has said he uses his ?ER32 collets on his Unimat.
A picture of the spindle adapter is what I would like to see.
Thanks, Dick
--
http://www.homemadetools.net/forum/?OFF-SET-tailstock-center-65965#post105972
?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION
 

Hi Dick.
I think I put photos in the files.
Carl.?

 

?
Photo in series of building.

On 06/15/2024 7:29 AM EDT Carl <carl.blum@...> wrote:
?
?
Hi Dick.
I think I put photos in the files.
Carl.?

 

Carl,
Thanks for posting your ER32 collet pictures.
Now as long as I have the full set of collets I will adapt my Unimat to suit.
Dick




On Saturday, June 15, 2024, 7:46 AM, Carl <carl.blum@...> wrote:

?
Photo in series of building.
On 06/15/2024 7:29 AM EDT Carl <carl.blum@...> wrote:
?
?
Hi Dick.
I think I put photos in the files.
Carl.?

--
http://www.homemadetools.net/forum/?OFF-SET-tailstock-center-65965#post105972
?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION
 

That's got some stick-out on it, but I don't believe it's much worse than the ER25 chuck I built. Looks like it was dialed in very well, too. Mine hasn't been tested yet. Greater capacity of the ER32 might be very, very nice.

Bill in OKC?

William R. Meyers, MSgt, USAF(Ret.)

Aphorisms to live by:
Good judgement comes from experience. Experience comes from bad judgement.?
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better.
Expect in one hand, expectorate in the other. See which one gets full first.



On Saturday, June 15, 2024 at 07:46:21 AM CDT, Carl <carl.blum@...> wrote:


On 06/15/2024 7:29 AM EDT Carl <carl.blum@...> wrote:
?
?
Hi Dick.
I think I put photos in the files.
Carl.?

 

Thanks,Carl!

How accurate are the ER32 collets when the collet adapter is mounted on the Unimat 12mm threaded spindle?
Thanks,?
Dick





On Saturday, June 15, 2024, 6:29 AM, Carl <carl.blum@...> wrote:

Hi Dick.
I think I put photos in the files.
Carl.?

--
http://www.homemadetools.net/forum/?OFF-SET-tailstock-center-65965#post105972
?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION
 

Hi Dick:
I think the cone surface was running within 0.001". For the work I do it is fine.?
Carl.

On 06/16/2024 9:56 PM EDT OldToolmaker via groups.io <old_toolmaker@...> wrote:
?
?
Thanks,Carl!
?
How accurate are the ER32 collets when the collet adapter is mounted on the Unimat 12mm threaded spindle?
Thanks,?
Dick



?

On Saturday, June 15, 2024, 6:29 AM, Carl <carl.blum@...> wrote:

Hi Dick.
I think I put photos in the files.
Carl.?

--
http://www.homemadetools.net/ forum/?OFF-SET-tailstock-center-65965#post105972
?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION

 

Thanks, Carl!
Dick




On Sunday, June 16, 2024, 9:43 PM, Carl <carl.blum@...> wrote:

Hi Dick:
I think the cone surface was running within 0.001". For the work I do it is fine.?
Carl.
On 06/16/2024 9:56 PM EDT OldToolmaker via groups.io <old_toolmaker@...> wrote:
?
?
Thanks,Carl!
?
How accurate are the ER32 collets when the collet adapter is mounted on the Unimat 12mm threaded spindle?
Thanks,?
Dick



?

On Saturday, June 15, 2024, 6:29 AM, Carl <carl.blum@...> wrote:

Hi Dick.
I think I put photos in the files.
Carl.?

--
http://www.homemadetools.net/ forum/?OFF- SET-tailstock-center-65965#post105972
?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI- LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION

--
http://www.homemadetools.net/forum/?OFF-SET-tailstock-center-65965#post105972
?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION

1 - 8 of 8