开云体育

Two cans here. Thanks for giving it a shot. Scott Sent: Tuesday, March 14, 2023 8:41 PM To: John Hutnick <johnhutnick@...>; [email protected] Subject: Re: [Unimat] Rustoleum Green Hammered Pre

Did they provide the mix code for the paint on the container? If so, can you provide it here?

I will take 2 cans if it can be done. Standard size can. Thank you for trying.

Pre C-19, if my memory is intact, I went to my local store and they indicated they would custom mix the color for me.? I have a pretty pristine unimat SL, and I'm pretty sure they will put it a spray

It's a great book! I'm going to have to scan parts of it, as I owe my copy to the guy who traded his Unimat for my 7x10 mini- lathe. Dug it and the notebook I put together myself out of the shop a

Thanks, Bill That is certainly a nice collection of projects for the minilathe. Dick

For $28+shipping, you can get the book they made with all Ted Hansen's 7x12 mini-lathe projects. Chapters 17, 18, and 19 are the complete dividing apparatus. You might as well get the whole book, as

Good work,Jeff! Thanks for the back issues source! “Well worth the money” in my opinion!

For all of us here, can you please provide more details.? I cannot find metallic hammered paint on the Sherwin Williams site.? Their "hammered" paint is for interiors. If anyone wishes to search

Silver solder would be a good choice, particularly if he had the correct hard, medium & easy solders, but he already has a brazing rod that should work if he can get his parts hot enough, and keep

I had the Sherwin Williams Industrial paint store mix up some hammer finish paint using a Unimat part for their color comparison. ?The outcome is extremely close to the original color. ?I've used

You could try silver soldering it back on.??Jeff

Hi, I did the same thing, dropped the chuck and broke a tooth on a jaw. After months of searching I found a seller on eBay that had individual jaws. The seller is emco_hobby_shoppe. I was able to buy

That is really a clean system. Well done! John [email protected]> wrote:

Workbench is too filled for me to make a pretty picture.? Here is a Uni3 with the milling column bolted on, mounted on a veneer particle board base.? Next to it is one of the green Chinese milling

True, but the webpage contains the option "avvisami quando disponibile", i.e. "let me know when it's available again" ...Verzonden vanaf mijn Galaxy -------- Oorspronkelijk bericht --------Van: Alan

The drill/mill attachment for the Unimat 3 is attached directly to the bed of the lathe at the back side. The attachment is made through a V-notch that is integrally part of the bed. The drill stand

I would disagree. Brazed joints are nearly as strong as the base metal, and these teeth don't see a great deal of force applied.? Getting them in the right place and such is more problematic, but

Brazing should hold up, but you're going to have to get the broken teeth in exactly the right place for each of the three teeth. Do you have enough fire brick or something similar to make a brazing

Good evening, Finally found time to commission the long travel stepper motor drive on my SL. The controller fitted has several useful functions other than just backwards and forwards but I'm having