开云体育

Re the comments from Mr. Jaynes, here is a piece from Ebay showing Unimat gray. Does anyone have this color?

Hello Jpow:? I have just used some thrust bearings on my unimat when I fitted stepper motors they are working very good here is the info: 4 pieces AXK0515/AS0515 Budget Needle Roller Cage with 2 AS

Hello Jpow: They also sell plastic washers to put behind the hand wheel. Allows you to reduce the clearance with less friction. Ball thrust bearings might be nice if you can find any. ( I might have

It’s been a decade since Lindsay Publications, Inc. officially closed their doors and now the time has come for Your Old Time Bookstore to do the same. We've begun our final inventory consolidation

It's possible your lead screw is bent, if it is, the bearing surfaces will touch at some points and not at others, that could be the cause of the tightness.

Hey all, I'm having this really irritating problem with backlash coming from the Unimat PC cross-slide handwheel. My understanding is that backlash (for the Unimat) can come from two sources A) Play

This what I can find in SE Asia where I live, I've chosen the silver for my old model. Tbe pale green looks ok, maybe too green. On Wed, 5 Apr 2023 at 8:14, Steve Johnson<steve@...> wrote:

Mine is a horrid colour and I will repaint it, I have managed to find silver hammered. What colour logo did the original cast iron models have? I dont have a logo on mine hopefully I can have a

Get the Sherline chuck. They are better quality than the emco ones.

I also have a red badged SL that has the Gray Hammered finish. And it is not uncommon for the motors to be a shade lighter then the lathe.?Jeff

Thanks very much Pat for the information. Looks like those eccentrics more often are missing now than present ? Was making the cam for mine out of brass and, like you, the shaft in steel. I’m

I found the text from my discussion of Unimat Colors, circa 1999. ?Sorry, I haven't resurrected the photos, but will keep trying: ------------- UNiMAT Colors ------------- I have identified four

EARLY in my Unimat collecting days, I read that the "Sears Roebuck" Unimats and accessories were, for some period of time, shipped in the Black Crackle finish. ?That said, "mixed" sets may or may not

Alan, I too received a fret saw without the eccentric and without the drive cam, I made both on my Unimat.? ?It is documented on this site, If you can't find it let me know and i will send you

Thank you Bill for sharing your advice and experience! I don't have much equipment so looking to get started first. I didn't know about emco being Cast iron vs steel for the sherline. Once my skill

Gorgeous! Thanks too, VERY much for including the fret saw’s eccentric wheel in your photos. That bit was missing from mine and I never before managed to find a pix of it. Thought the form would be

Keith, Both the 3-jaw and 4-jaw chucks for my DB200 are original and have backplates. Perhaps you're thinking of the Unimat 3 (or later SL chucks?).

Most important for me is the Unimat MK2a with mill collumn and I think original. The black crackle paint is in perfect condition and the 2 rods (bars) didn't see that much use as the other unimat's I

Yes correct, what i meant is I coudn’t find a black crackle one online. So I it was a surprise to me when it turnt out black. The photo’s the seller put online where so bad that almost everything

Depends very much on condition. A like-new Enco chuck is probably made of cast iron, IIRC. Drop it on a concrete floor just once, and it can turn to crap. Cast iron is a bit brittle, and easily