¿ªÔÆÌåÓý

No idea whether this seller (based in Vienna) will ship overseas but here you go - €1150 is the asking price. On top of the cabinet you will also notice the original carton box in which the set may

The problem with the Google translator is that it translates word for word. The Deepl translator translates the texts meaningfully. This is particularly important for me when I translate English texts

Bruno, don't worry about your English. I lived in Germany for 5 years, and never got much beyond "Guten Tag."? I've been studying Spanish off and on for much of the past 60 years, and despite that,

Bruno, for myself, no worries. I'd rather try to learn from each other and just work through the odd translations. There are a couple of words in Japanese I often want to use, but the translation has

Hi Don. This is probably their most expensive kit ( https://www.arwarnerco.com/Kit-8-3-8-inch-Turning-C-Right-Hand-Left-Hand-a-p/kit-08.htm ) but you only cry once. The tools being flat are very easy

Yes. Like Andrei (Hi!!, just finely got the die grinder set back up), 95% great experience. The other 5% was I didn't know the difference in a horizontal and vertical threading insert tool and broke

I was referring to turning steels and broken centering drills, as well as broken shanks of taps. I apologise for my use of English, I translate the texts from German with "deepl-Translator"

To me it seems that reference is made to the diameter of the cutting tools which in this case are reused broken center drills and broken taps. Op 17-04-2024 02:29 CEST schreef OldToolmaker via

This is probably a Google translation issue.

I too was confused by the phrase ¡¯turning rings¡¯. I finally settled on the possibility that it refers to the diameter of the curled waste material that the lathe produces in making a cut, however

What do you consider ¡°turning rings¡±. I am puzzled by your terminology.Dick

Jose Luis, en cualquier ferreter¨ªa o tienda de herramientas las deber¨ªan tener.Saludos.

M¨¦xico , gracias [email protected]> escribi¨®:

Hola Jose Luis, donde te encuentras? Saludos

Aliexpress

Hi Gang: I like to use an electric fry pan for drying paint. Also good for bending Plexiglas. Carl.

Amazon? eBay? Best Regards, Andrei mailto:calciu1@... ________________________________ Sent: Monday, April 15, 2024 4:17 PM To: [email protected] <[email protected]> Subject: [Unimat] Tarraja

This is what I do. If the part doesn't have a surface I can rest it on that is unpainted, I will make hooks from stiff wire and hang it from the oven rack instead. Not only does this help the paint

After letting it sit for a while, I would bake it in the oven at low temperature for 2 - 3 hours.? This is typically what we do with solvent-based model railroad paints.? And, no, it doesn't catch

Estimados amigos, estoy buscando una tarraja mano derecha , milim¨¦trica 14-1 , les agradecer¨ªa me indiquen d¨®nde la puedo conseguir gracias