开云体育

On Thu, Mar 13, 2025 at 02:50 PM, Kevin Groenke @ PersonMakeObject wrote: > > Best Regards, > *Kevin from PersonMakeObject* > ( http://personmakeobject.com/ ) > (

I've done similar for my U3, unlike yours mine is set to length as it was made for a specific job.A headstock internal stop for the Unimat 3. | | | | | | | | | | | A headstock internal

Yes Phil, I made a shouldered plug with a screw in it so I can easily chuck stock to the same depth every time. I'm maintaining tolerance of +/-.02mm with this process. For the travel stop on the

Kevin, good idea do you have a depth stop in the chuck?, it certainly quickens the work through nice one. I have the SL so will give it a try, I have also have the U3 now so no go on that. Phill

There is a? Unimat SL DB200 Lathe up for auction on Shop Goodwill Pickup only in Waco, TX on shopgoodwill.com. It looks like it includes an autofeed and part of a threading attachment. The auction

Kevin, In reference to your spindle ram action, what machine are you using? Is it a Unimat? Dick http://www.homemadetools.net/ forum/ OFF-

I'm working on a batch of hardware for the xacto-ish knives I make and I adjusted the geometry a little to be able to use the spindle ram axis to cut the 2mm x 18mm shoulders. This is working far

I was also a member of a wood carving club years ago. -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972 http://www.homemadetools.net/ forum/s...995#post112113 (

With a price like that I would think twice about buying one. I have all the hand carving chisels I would ever need. If I need a special I can just make my own and harden and hone the edge. Done that

sorry I meant woods I would consider soft. best of luck, curious to hear your findings Nate

I'm a big fan of the Foredom company's products, except that one. I have no gripes about the quality of the hand pieces make, possibly because I could never really use it. I assume that was because

Thank you, Richard! that is just what I wanted! Dick -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972 http://www.homemadetools.net/ forum/s...995#post112113 (

Micromark has one listed at $76.95 USD. https://micromark.com/products/reciprocating-carving-hand-piece?keyword=carver Richard

I want to buy a hand held reciprocating wood carving power tool. I saw one at one time but cannot find it. Any help on where I might look for such a tool. Dick -- http://www.homemadetools.net/ forum/

Thank you for the information James! -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972 http://www.homemadetools.net/ forum/s...995#post112113 (

Thank you, Keith! Dick -- http://www.homemadetools.net/ forum/ OFF- SET-tailstock-center-65965#post105972 http://www.homemadetools.net/ forum/s...995#post112113 (

I think the ordinary cheap digital tyre depth gauge is as accurate as many of the cheaper calipers. There are some with a 50 mm range. I was considering using one on the SL headstock, maybe on the

Here is a link that has been around. Not sure if these are still available. https://www.ebay.com/itm/334656596967 For what it's worth, I opted away from this option because I use my Unimat 3 as a

Thanks Dick! I love an excuse to fire up the Unimat. My wife jokes that every project now requires a part to be turned on the lathe.

Do you mean like these: Tire Depth Gauge Digital for sale | eBay ?