开云体育

If you use the optivisor then take a look at the Quasar Lighting System. It fits over the front of the lens plate & has a LEDs top & bottom on each end & the centre. It gets rid of shadows very well.

Thanks. At a minimum couldn't see how it could possibly work without pulleys.

I think this is a milling column / mount assembly manufactured (or at least marketed) by jjg-tools in Wales. They have a range of U3 add-ons, ball turners and the like. Looks like you would still need

I have a discount offer from an eBay seller for a mill/drill attachment I put a watch on just to see what it would go for. It's different from others listed and I don't know if it's different item

Hi, took me longer than expected, but here are the pictures. The steady rest is already sold locally.

It opened for me in UKSent from my Galaxy

Hi Gang: At a hydro electric dam they use wedges of Lignum Vitae for the main shaft bearings. As it slowly wears they just push the wedges farther in. It was cool, the shaft only turns about 12 RPM

The links worked for me, no problem. Peter B. [email protected]> wrote:

Andrei, The links you posted are not active and therefore non functional. It would be better if you give us all that we can actually link to. -- http://www.homemadetools.net/ forum/ OFF-

If you find a job shop to do it, regardless as to whether you can manage to find out how they did it, please report back. [email protected]> wrote:

Thanks everyone, interesting stuff. I’d be far more likely to get any work like this done by a proper machine shop I think. Yes, lathes.co.uk is a wonderful site, a true treasure trove. Great for

Excellent! ?Good to hear you can get an equivalent over there ‘across the pond’. It’s even green! I don’t use oil on my U3 (not on the bed anyway), and as the original keep plates were a

Yes, Lignum Vitae was used for propeller shaft bearings in ships, quite remarkable I think. Policeman’s truncheons and bowling balls (lawn bowls) attract attention at auctions as they are sometimes

You can machine a groove of any shape inside a tube using an 1850s method that works quite well. Get an oak or ash rod or broom stick that is more than 2x the length of the tube. Machine the wood

Nylatron is moly disulfide impregnated nylon. It’s very good engineering plastic, tough and slick. Delrin af is delrin impregnated with Teflon if I am not mistaken. UHMW ultra high molecular weight

Instructions for the Tapmatic 70x can be found here: https://www.tapmatic.com/product_line_instructions_x_series_self_reversing_tapping_attachments.ydev Richard

Although I don’t like his lost foam method here’s one way to get your own shaper. https://youtu.be/u47fFxdMDXQ?si=BJd0xVnTO9_-lIfY Sent: December 14, 2024 9:43 AM To: [email protected] Subject: Re:

Hi Gang: I think this tapper takes rubber flex collets. I don't see any included, but I'm sure you could make substitute collets. Even with shipping, not a bad price, if the bid doesn't go too high.

https://www.mcmaster.com/products/oil-impregnated-nylon/ Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Saturday, December 14, 2024 2:09:10 PM To: Peter Brooks

Lignum vitae might perhaps do it? the tropical oily wood that was once used as water resistant and very strong bearing for the main shaft of ocean going ships. Very expensive these days, but I just so