开云体育

In my case, I’ve found the U3’s original motor well adapted for the lathe… no on/off duty cycles such as with my SL. However, I did find it useful to adapt a second motor to the U3 milling

Doesn't look too bad. Light rusting on the bed can be cleaned off with a pot scourer - Scotchbrite or similar. That would do for most of the other rusty bits - then polish them up with a good wax

Absolutely! female M14 to male M12 (not M13). Sorry for the typo.

Just make sure the adapter is female M14 to male M12, not M13 - sorry about that, Alan Verzonden vanuit Outlook voor iOS Verzonden: donderdag, september 5, 2024 6:23 PM Aan: [email protected]

Profile grinder !

its in way better condition than mine- which I have owned from new, just needs a good clean

Hello, Doesn’t look that bad at all ? I’m guessing you’ll enjoy using the U3. One thing you might consider straight away is getting is a M14 female to M13 male adapter... Allowing you to use

I want to reproduce some cams that are on a shaft. Some are circular with the shaft offset from centre, others elliptical & some are sort of heart shaped. I do not want to have to file these up. There

Just had this delivered: The owner fell ill quite a while ago and can no longer use it so his son moved it on. Now it's my turn to clean it up and get it working again, it is in a sad state but if all

stl can be imported into fusion, as a mesh (i have just imported a 3d scan of a part I wanted to make an insert for, admittedly I didnt edit it (just used it to build a model inside))

I have been having trouble with some motors from China at work, where the power, voltage and current figures just didn't make sense, so I've looked again at the spec for these motors. I haven't found

Cool! Best Regards John

Viewstl.com is a free stl viewer 3dviewer.net Freestlview.com Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Wednesday, September 4, 2024 4:43:17 PM To:

That's not the same as a IGES or STEP file which can be imported into most CAD systems and then edited. John Sent: September 4, 2024 1:04 PM To: [email protected]; johnd@... Subject: Re:

From what it looks like - the site is still there and some of the content is still accessible. However all of the HTML files appear to be MIA. I was able to access the content by grabbing some urls

You can upload the stl file in a viewer and look at it Best Regards, Andrei mailto:calciu1@... ________________________________ Sent: Wednesday, September 4, 2024 3:28 PM To: [email protected]

Any chance the actual CAD drawing is available? Sent: September 4, 2024 7:56 AM To: [email protected] Subject: [Unimat] 3D Print of Unimat Logo With thanks to James Quick for his Emco Unimat (1).stl

Thanks. Still have a long way to go. I get extremely frustrated, I mean chest pain level, with 3D software. I think I've tried 5 at this point. What I could do in PowerPoint with simple lines or

Looks great!! Jim

With thanks to James Quick for his Emco Unimat (1).stl file ( /g/Unimat/files/Emco%20Unimat%20%281%29.stl ) Missed coloring one spot. Bambu X-1 Carbon, Automatic Material System (AMS)