开云体育

Probably only if it was a relic of the True Cross ;-)

Hi John, Nice work, a handle? I totally get your sentiment with the "wood" thing. But it brings to mind the question I've long had about the source of the stigma? I have my opinions, but I would love

Hi Larry: The table saw can be run slow so it doesn't melt plastic parts. Carl.

I too have turned wood on my uni. I'm a model railroader and have made model telephone poles, just like the ones in my area, which are are made from pine trees and straight as an arrow. Also I use the

Hi John: I cut wood all the time. I've seen bread sticks turned too. Carl.

Hi Keith: Add a line switch or just unplug it. In trade school we had to shut the mills off at the wall during setups. If swarf is a problem tape over the openings. Most of our cuts are short, but if

Best Regards John

Many of you may find it sacrilegious but tonight I was turning wood on my SL.

Here is a motor upgrade I did: /g/Unimat/topic/dc_motor_for_unimat/104474780 Don't expect to save money on this. You'll need motor, power supply, PWM, plug, switch, enclosure,

Two problems: standard sewing machine motors rotate the wrong way - it's not too difficult to reverse them, or you can find an overlocker motor, which usually goes the opposite way, but may cot more.

Hi: Find an older sewing machine with an external motor. It will have a foot speed control too. Carl.

My SL (much the same as the DB) ran very well on a 130 W DC 24 V motor. The lower wattage motors are a bit shorter than the higher power ones (similar are available up to 200 W) and that keeps them

There's a few videos on YouTube guys talking about replacing their motors usually with a DC and a variable speed controler.... One city did it for just under 50 bucks but I'm not sure what year that

Look on Ebay.? There are 24 volt scooter motors, 100 watt and 150 watt.? Currently you can buy a 100W for $28.99 and 150W for $36.99.

Jon, Many of us have converted to 150 watt DC motors. Much better and quieter than the original motor and variable speed too. Dick -- http://www.homemadetools.net/ forum/ OFF-

Be aware that a motor is not the only thing you need to run a lathe. This is an expensive hobby. Best Regards, Andrei mailto:calciu1@... ________________________________ Sent: Tuesday, August

I'm just getting set up. Not sure what I'll make. Bunch of half formed ideas that I'll have to work out. When I get it all together I'll post some pics.....

Hi- Newbie to the world of Emcos, but found this guy at an estate sale. Couldn't resist it.? I've cleaned it up, and nothing seems bent out of true or seized- BUT- it lacks a motor.? I cant afford

Its better to have it and not need it than to need it and not have it ! :)

I have used my U3 for a number of things I turned an alternator mounting pivot bushing for? a Mercedes Airport bus now camper Bus owner got bushing actually 2 pressed together with correct ID?