开云体育

Hi Dick. I think I put photos in the files. Carl.

2.7.6 Ausrüstung und Zubeh?r für EMCO Drehmaschine/ Drehbank 1-gg--tools-com.translate.goog Lots of interesting goodies including stuff for unimats. Best Regards John

Apply Google translator and all will be revealed. Shipping to UK would be expensive, Brexit. James [email protected]> wrote:

Very interesting site some nice tools also a pity you can't read it in English but then I guess they would not ship to UK. Phill

Thanks Charles, I’ll try giving it a sharpen. It’s done a fair bit of work over the years.

http://gg-tools.com/ ( http://gg-tools.com/ ) found this website the other day and thought I'd share

Does anyone here on this group have any pictures of an ER32 collet mounted on a Unimat spindle? The ER32 collet is rather large and I would like to see a complete setup. Carl has said he uses his

I very much prefer single flute countersinks.? And, for brass, just high speed steel, not carbide. And having it sharp.? If not already sharp (and if from one those inexpensive sets, it might not be

I’ve got to countersink some brass for screws, and am finding it hard work as the countersink size gets larger. I’m using a standard 5 flute HSS countersink in a drill press. Are there better

My badon Zamac vs. aluminum, thanks for the correction. A machine technology instructor recently secured his to an out of caliber surface plate. I have mine on a sink cut-out, figure it will be fine

You are not including the later machines cast in aluminium alloy, but anyway - in my experience most of the rigidity problems come from the carriage and cross slide, mainly if the bearings are not

Hadn't know early machines were cast iron. Make much of a difference in rigidity? Thanks, Ron

Hadn’t immediately noted that the motor in your post was 110 volts. The eBay photo also shows it has a U.S. electrical plug. Could it be that the same tariff regulations which caused watch

That machine looks very little used, or else very well cared for. Yes, it's an induction motor. 115 V 60 Hz, 2800 rpm. If it has one capacitor it's capacitor start, if two, then it's also capacitor

It's on e-bay with more pictures https://www.ebay.com/itm/326159417219 I've seen other Unimat motors made in Holland.

P.S. Sorry, wanted to say: “Cased and timed” locally in the UK, North America and Australia! Sent: Wednesday, June 12, 2024 6:42 AM To: [email protected]; vpol1@... Subject: Re: [Unimat]

Very interesting: “MADE IN HOLLAND”. Did Emco have a subsidiary in the Netherlands? Or a ‘big’ Benelux importer who found a customs/import-duty advantage by adding the motors locally? There

I suggest for anyone here wanting to learn how to run a lathe get your hands on a copy of “How to Run a Lathe” by South Bend. This is one of the best ways to get started as it covers all aspects

I bought some NOS 1/4” HSS tool blanks on ebay and hand grind them. I’m vey pleased with the results. Crucible Steel Co. 5 REX AAA HSS 1/4" Lathe Tool Bits, New Old Stock ebay.com Best Regards

Instructions for the Edelstaal tools have been posted in the Unimat files.? They have the color codes for the cutters, and sharpening instruction.? Bits are M-2 high speed steel, T-15 high speed