开云体育

Brian, Have you built one of the Hemingway kits? I guess it can all be machined on a Myford and within the home workshop. If so this maybe a nice route. I notice they are saying you can use it for

Having drilled the first hole, you could bolt the rods onto the Unimat base, which will hold the rod in the right position for drilling the second one. You could also turn it over and spot through the

I am late to this question, but I made extended way bars for both axes of my Unimat in order to mount stepper motors on each axis. You can see pictures (and drawings) in my album (and in the Files

Morning Unimat SL users, I have contacted the owner of this unit and am making arrangement to pick it up. I own an older version that I use in my wooden toymaking and would like another unit. I am

Cheers everyone, I wont bother with the unimat attachment. and shall pop into Machine Mart see what they have.... it seems to be my favourite shop at the moment...... Steve ---In

Hi Steve. Axminster and Scheppach (Machine Mart) both sell scroll saws at that price that have variable speed and holders for pinless blades (my cheaper scroll saw is way too fast for metal cutting

These sell for collector prices. IMO you'd be better off buying a purpose made machine, new or used. You could even, maybe, get a handheld saw and make a little stand up for it to hold it upside down.

My opinion is that the Unimat Jig/Fret saw is a little light to work on 3mm thick brass. Cary

This is a very late SL1000. Note the black plastic hand wheels. Same as used on the Unimat 3s in 1976. Cary

I purchased my alloy Unimat SL new in 1968, and it came with a "mahogany" stained box. I still have it, and given the condition, I suspect it was a "semi-gloss" varnish stain, as it hasn't absorbed

Hello Steve: One bonus of the Unimat, is you can change the speed. I use my Unimat table saw to cut plastic building walls. My Harbor Freight saw spins so fast it melts the plastic, while at low RPM

Fret saw or jig saw?? I have the jigsaw attachment but have had limited use out of it - the blade wanders a lot.? However I can mount a powerdrill type jigsaw blade in it, much more rigid, and use

Hi all, I'm after a fret saw to allow me to cut some clòck wheels. The material is brass sheet up to 3mm thick. I was just wondering would the SL fret saw attachment be up to the job? I can get one

Not when you factor in Manuel’s subsistence. Sent from my Windows 10 device Sent: 11 March 2019 00:22 To: UNIMAT@... Subject: Re: [UNIMAT] Unimat Lathe and Mill $375 Austin TX ? The saw

The saw is worth most of that! UNIMAT@... wrote:

I have a friend in Austin who might be persuaded to have a look!? Bill in Boulder Co USA

Unimat miniature Lathe and Mill. Excellent condition. Made in Austria Includes: * Table Saw * 3 Jaw Chuck * 4 Jaw Chuck * Rotary Table * Vice * Tooling * Steady Rest * Manuel *Accessories Needs Belts

I think I got one imported set from Victor in NY and one set from Harbor Fright locally. triangulas inserts 221 I think They work great on 6061, Delrin, brass and acrylic pen blanks. I do use the A2Z

Previous owner purchased mine new back in 1969. Box appears to have been stained, oil maybe but couldn't prove it. Definitely no finish as I tested a couple of locations and nothing but wood. Have

Thanks group for the sound advice . I’ll contact Tom’s first and proceed accordingly thereafter. Cheers, Bill