开云体育

Dave, May thanks, got it now. Cheers David Sent: 10 February 2025 20:50 To: DAVID DORNOM <su8410@...>; [email protected] Subject: Re: [Unimat] Charts & Tables for

Here a direct link /g/minilathe/files/5%29Charts_&_Tables Dave

You have to log in to the groups.io website, go to the group you want to look at, and click on the files link. Which should be near the bottom of the list on the left side of the web page. Bill in

Good morning Jeffrey, How do you get to the files section? I cannot raise it? Regards David Sent: 10 February 2025 03:59 To: Jeffrey Kropp

That's going to depend on your eyes, and what you need to make them happy. You might want to try these:?https://www.harborfreight.com/head-lamp-magnifier-58788.html They're $15, and have 6 different

I use type in past I do not do have today Dave

This link to group I just tested and is working /g/minilathe Dave

Here is the Grobet version: https://grobetusa.com/product/led-illuminating-magnifier-with-two-way-adjustable-headband-item-no-29-569/ And here is a regular optivisor with extra lenses:

From what you describe, I would recommend 3x or 4x, based on how close you want to be.? 2x too little, 5x too strong.? I have acquired one of each power over time. As far as another brand, I have

The magnification lenses each have a focal length. How close to your face will be the work? That will help you pick the closest lens. Or you can buy copy which comes with all lenses. Alternatively,

I intend to purchase an “Optivisor” head band magnifier. What magnifying strength should I purchase? I will use it for detail work such as small parts and hand engraving.Any

Computer whiz I am not - cannot find a working link for charts??? [email protected]> wrote:

Wasn't and got rest to upload. Dave FYI This site does? have other useful data /g/minilathe

Some charts did not upload I ask keep files for a few days so you can download. I will try later Dave

davesmith1800 <davesmith1@...> updated folder *//1) Charts Tables*

Hi Dave, could you post it here as well? (You can’t see the Files section in the minilathe io group unless you join it, I’ve got no reason to…)

*Here a list files Charts & Tables for Machinist's. I have found to be very handy doing work .* *I hope you post your? favorite charts & talbes.* I uploaded to a different site so I do not fill up

An image of some of the chucks I use on the SL and now the U3, top one is std SL M12 chuck, next is a small Jacobs one on an M12 to fit SL, next an extension taper to get me over the cross slide on

Temu and Shein are generally garbage merchandise. There is the occasional pearl. Any clothing purchase will be met with disaster. The sized are for midgets and the material is rags. I am probably not

Hello Dick: TEMU is a China group similar to Amazon. Small sellers ship directly to buyers in the USA. TEMU demands low prices and minimum sales. Lost somewhat in translation TEMU stands for "Team