For sale in Austria: EMCO UNIMAT 3 with many acccessories incl. original EMCO cabinet
No idea whether this seller (based in Vienna)? will ship overseas but here you go - �1150 is the asking price. On top of the cabinet you will also notice the original carton box in which the set may have been acquired??
?
?
?
|
Re: AR Warner HSS Inserts?
The problem with the Google translator is that it translates word for word. The Deepl translator translates the texts meaningfully. This is particularly important for me when I translate English texts into German. It makes it easier for me to understand.? I can then very easily correct any grammatical errors.
The Goole translator very often delivers incomprehensible words that make no sense to me.
Translated with DeepL.com (free version)
|
Re: AR Warner HSS Inserts?
Bruno, don't worry about your English. I lived in Germany for 5 years, and never got much beyond "Guten Tag."? I've been studying Spanish off and on for much of the past 60 years, and despite that, still not much better than "Buenas Dias."? I can still sing at least parts of a couple of songs I learned back in the 7th Grade, and understand them, but can't understand someone speaking Spanish, though I can sometimes pick out words I understand. And that includes nearly 20 semester hours of Spanish & Conversational Spanish. My brain does not learn other languages well. I have similar problems with mathematics beyond very basic algebra.?
Bruno, mach dir keine Sorgen um dein Englisch. Ich habe fünf Jahre lang in Deutschland gelebt und bin nie über ?Guten Tag“ hinausgekommen. Ich habe in den letzten 60 Jahren immer wieder Spanisch gelernt und trotzdem nicht viel besser als ?Buenas Dias“. Ich kann immer noch zumindest Teile einiger Lieder singen, die ich in der 7. Klasse gelernt habe, und sie verstehen, aber ich kann niemanden verstehen, der Spanisch spricht, obwohl ich manchmal W?rter herauspicken kann, die ich verstehe. Und dazu geh?ren fast 20 Semesterstunden Spanisch und Konversationsspanisch. Mein Gehirn lernt andere Sprachen nicht gut. Ich habe ?hnliche Probleme mit der Mathematik, die über die grundlegende Algebra hinausgeht.
Instead, I use Google Translate.?
Bill in OKC
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY!
Expect in one hand, expectorate in the other. See which one gets full first.
On Wednesday, April 17, 2024 at 10:30:17 AM CDT, Bruno <bmstj@...> wrote:
I was referring to turning steels and broken centering drills, as well as broken shanks of taps.
I apologise for my use of English, I translate the texts from German with "deepl-Translator"
Occasionally the programme also uses the US version.
|
Re: AR Warner HSS Inserts?
Bruno, for myself, no worries. I'd rather try to learn from each other and just work through the odd translations. There are a couple of words in Japanese I often want to use, but the translation has no cultural equivalent in US English.
Ron?
|
Re: AR Warner HSS Inserts?
On Thu, Apr 11, 2024 at 01:57 PM, McKee, Don {Quaker} wrote:
Care to share some part numbers?
Hi Don. This is probably their most expensive ? but you only cry once. The tools being flat are very easy to re-hone the edge, they "should" never need regrinding. Less than perfect here, I am full of exceptions LOL. I'm also partial to "tangent" tool holders. The only commercial producer I'm aware of is in Australia. Pricey, but the tool is easily honed, rarely needs to be reground.? If you have access to a mill and are interested in shop made, I believe there are discussion threads on the Hobby Machinist and the forums for making them. Ron Ron
|
Re: AR Warner HSS Inserts?
Yes. Like Andrei (Hi!!, just finely got the die grinder set back up), 95% great experience. The other 5% was I didn't know the difference in a horizontal and vertical threading insert tool and broke my insert using it the wrong way. The help I requested from AR Warner was "Take a class." Well turned out Little Machine Shop where I purchased mine didn't know either. The person who pointed me to the tooling let me knot they are vertical tools. No problem since.? They are perfect for low power lathes. I use them mostly on a 10". "But" for comparison, a carbide insert tool for 2" material, not unreasonable for a 10" lathe, requires running mine at top RPM. Yes it's doable, but . . .? just my $.02
Ron
|
Re: AR Warner HSS Inserts?
I was referring to turning steels and broken centering drills, as well as broken shanks of taps.
I apologise for my use of English, I translate the texts from German with "deepl-Translator"
Occasionally the programme also uses the US version.
Occasionally the most curious expressions come to light.
|
Re: AR Warner HSS Inserts?
To me it seems that reference is made to the diameter of the cutting tools which in this case are reused broken center drills and broken taps.?
Op 17-04-2024 02:29 CEST schreef OldToolmaker via groups.io <old_toolmaker@...>:
?
?
What do you consider “turning rings”. I am puzzled by your terminology.
Dick
?
On Friday, April 12, 2024, 4:08 AM, Bruno <bmstj@...> wrote:
If the turning rings are smaller in cross-section, less grinding is required. I like to use small cross-sections, including broken centre drills and sometimes broken taps.
--
http://www.homemadetools.net/
forum/?OFF-SET-tailstock-center-65965#post105972
?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION
|
Re: AR Warner HSS Inserts?
This is probably a Google translation issue.
toggle quoted message
Show quoted text
On 4/16/24 9:05 PM, Tom Angell via groups.io wrote: I too was confused by the phrase ’turning rings’. ?I finally settled on
the possibility that it refers to the diameter of the curled waste
material that the lathe produces in making a cut, however I have no idea
if that is correct. ?Please let us uneducated know precisely what the
phrase means.
Tom A
On Apr 16, 2024, at 8:29?PM, OldToolmaker via groups.io
<old_toolmaker@...> wrote:
What do you consider “turning rings”. I am puzzled by your terminology.
Dick
<>
On Friday, April 12, 2024, 4:08 AM, Bruno <bmstj@...> wrote:
If the turning rings are smaller in cross-section, less grinding
is required. I like to use small cross-sections, including broken
centre drills and sometimes broken taps.
--
?OFF-SET-tailstock-center-65965#post105972
<>?SMALL TURRET TOOL POST PLANS
<>?LARGE TURRET TOOL POST PLANS
<>?MINI-LATHE CARRIAGE LOCK PLANS
<>?SMALL QC TOOL POST PLANS
<>?QUICK CHANGE LATHE TURRET
<>?MINI LATHE COMPOUND PIVOT MODIFICATION
--
Elliot Nesterman
elliot@...
www.ajoure.net
"The finest jewel cannot disguise a flawed character."
|
Re: AR Warner HSS Inserts?
I too was confused by the phrase ’turning rings’. ?I finally settled on the possibility that it refers to the diameter of the curled waste material that the lathe produces in making a cut, however I have no idea if that is correct. ?Please let us uneducated know precisely what the phrase means.
toggle quoted message
Show quoted text
On Apr 16, 2024, at 8:29?PM, OldToolmaker via groups.io <old_toolmaker@...> wrote:
What do you consider “turning rings”. I am puzzled by your terminology. Dick
On Friday, April 12, 2024, 4:08 AM, Bruno <bmstj@...> wrote: If the turning rings are smaller in cross-section, less grinding is required. I like to use small cross-sections, including broken centre drills and sometimes broken taps.
-- http://www.homemadetools.net/ forum/ ?OFF-SET-tailstock-center-65965#post105972?SMALL TURRET TOOL POST PLANS??LARGE TURRET TOOL POST PLANS?MINI-LATHE CARRIAGE LOCK PLANS?SMALL QC TOOL POST PLANS??QUICK CHANGE LATHE TURRET?MINI LATHE COMPOUND PIVOT MODIFICATION
|
Re: AR Warner HSS Inserts?
What do you consider “turning rings”. I am puzzled by your terminology.
On Friday, April 12, 2024, 4:08 AM, Bruno <bmstj@...> wrote: If the turning rings are smaller in cross-section, less grinding is required. I like to use small cross-sections, including broken centre drills and sometimes broken taps.
--
http://www.homemadetools.net/forum/?OFF-SET-tailstock-center-65965#post105972
?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION
|
Jose Luis, en cualquier ferretería o tienda de herramientas las deberían tener. Saludos.
On Tuesday, April 16, 2024, 09:52:03 AM GMT-5, Jose lopez ruiz <pp.pegazo@...> wrote:
El mar., 16 de abril de 2024 8:42, Juan C. Pepper via <jpepper17= [email protected]> escribió:
Hola Jose Luis, donde te encuentras? Saludos
On Monday, April 15, 2024, 04:24:16 PM GMT-5, Jose lopez ruiz < pp.pegazo@...> wrote:
Estimados amigos, estoy buscando una tarraja mano derecha , milimétrica 14-1 , les agradecería me indiquen dónde la puedo conseguir gracias?
|
toggle quoted message
Show quoted text
El mar., 16 de abril de 2024 8:42, Juan C. Pepper via <jpepper17= [email protected]> escribió:
Hola Jose Luis, donde te encuentras? Saludos
On Monday, April 15, 2024, 04:24:16 PM GMT-5, Jose lopez ruiz < pp.pegazo@...> wrote:
Estimados amigos, estoy buscando una tarraja mano derecha , milimétrica 14-1 , les agradecería me indiquen dónde la puedo conseguir gracias?
|
Hola Jose Luis, donde te encuentras? Saludos
On Monday, April 15, 2024, 04:24:16 PM GMT-5, Jose lopez ruiz <pp.pegazo@...> wrote:
Estimados amigos, estoy buscando una tarraja mano derecha , milimétrica 14-1 , les agradecería me indiquen dónde la puedo conseguir gracias?
|
Aliexpress? 
|
Re: Unimat SL refinish/refurb
Hi Gang:
I like to use
an electric fry pan for drying paint.
Also good for
bending Plexiglas.
Carl.
On 4/15/2024 5:34 PM, Paul Allen wrote:
toggle quoted message
Show quoted text
This is what I do. If the part doesn't have a
surface I can rest it on that is unpainted, I will make hooks
from stiff wire and hang it from the oven rack instead. Not only
does this help the paint cure faster, but I also find it
generally improves the durability quite a bit. I usually bake it
around 250F for as long as I feel like it. Let the part cool in
the oven before removing to avoid damage to the paint finish, as
it will still be very soft while it's hot. I painted my lawn
hydrant last year with blue gloss Rustoleum and the paint is
holding up incredibly well, even on the hook I hang my bucket on
while filling it. BTW, gloss is going to be a more durable and
easier to clean finish than satin. Satin is better at hiding
blemishes though.
Paul
On Mon, Apr 15, 2024 at
3:28?PM John Hutnick via <johnhutnick= [email protected]>
wrote:
After
letting it sit for a while, I would bake it in the oven at low
temperature for 2 - 3 hours.? This is typically what we do
with solvent-based model railroad paints.? And, no, it doesn't
catch on fire or blow up.? Just stinks.? So open windows a
little if possible.
And you might want to consider a satin finish top coat.? After
this is really cured, Rustoleum should be durable.??
I prefer their hammered gray or silver.? These are similar to
some earlier Unimats.??
|
|
|
Re: Unimat SL refinish/refurb
This is what I do. If the part doesn't have a surface I can rest it on that is unpainted, I will make hooks from stiff wire and hang it from the oven rack instead. Not only does this help the paint cure faster, but I also find it generally improves the durability quite a bit. I usually bake it around 250F for as long as I feel like it. Let the part cool in the oven before removing to avoid damage to the paint finish, as it will still be very soft while it's hot. I painted my lawn hydrant last year with blue gloss Rustoleum and the paint is holding up incredibly well, even on the hook I hang my bucket on while filling it. BTW, gloss is going to be a more durable and easier to clean finish than satin. Satin is better at hiding blemishes though.
Paul
On Mon, Apr 15, 2024 at 3:28?PM John Hutnick via <johnhutnick= [email protected]> wrote: After letting it sit for a while, I would bake it in the oven at low temperature for 2 - 3 hours.? This is typically what we do with solvent-based model railroad paints.? And, no, it doesn't catch on fire or blow up.? Just stinks.? So open windows a little if possible.
And you might want to consider a satin finish top coat.? After this is really cured, Rustoleum should be durable.??
I prefer their hammered gray or silver.? These are similar to some earlier Unimats.??
|
Re: Unimat SL refinish/refurb
After letting it sit for a while, I would bake it in the oven at low temperature for 2 - 3 hours.? This is typically what we do with solvent-based model railroad paints.? And, no, it doesn't catch on fire or blow up.? Just stinks.? So open windows a little if possible.
And you might want to consider a satin finish top coat.? After this is really cured, Rustoleum should be durable.??
I prefer their hammered gray or silver.? These are similar to some earlier Unimats.??
|
Estimados amigos, estoy buscando una tarraja mano derecha , milimétrica 14-1 , les agradecería me indiquen dónde la puedo conseguir gracias?
|
Herman de Leeuw
Bruno
Bill in OKC too
Tom Angell
OldToolmaker
David James
Carl