¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Unimat
  2. Messages
Expanded Topics Messages Polls
Date
Re: Adapting the Unimat 3 Threading Attachment

 

There used to be a weird system that kind of did that but it was a big box that sat under the lathe and only did a few threads.

Not sure where you'll find info - check the Links section which is called Databases?here.

Neil
-----


On Thu, Mar 2, 2023 at 2:34?PM OldToolmaker via <old_toolmaker=[email protected]> wrote:
Would it be feasible to adapt the Uni 3 threading attachment to the Unimat DB 200?

Re: Does anyone make new thread guides for the db /sl?

 

Would you be willing to share the dimensions or provide a link to your source? I'd like a chance to take a hack at making some using subtractive manufacturing. ;)

Bill in OKC?

William R. Meyers, MSgt, USAF(Ret.)

Aphorisms to live by:
Good judgement comes from experience. Experience comes from bad judgement.?
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better.
Expect in one hand, expectorate in the other. See which one gets full first.



On Thursday, March 2, 2023 at 07:53:41 PM CST, Mike Gidley <mike.61dley@...> wrote:


Found the dimensions.
Made some STL files for the 3D people.

Re: Does anyone make new thread guides for the db /sl?

 

Found the dimensions.
Made some STL files for the 3D people.

Follower27tpi.stl
Follower27tpi.stl
Master27tpi.stl
Master27tpi.stl

Re: Adapting the Unimat 3 Threading Attachment

 

Having both a U3 and an SL, each with it's appropriate threading accessory, I absolutely agree with Matt. In fact, it would be simpler to build an attachment from scratch than to try to adapt the ¡¯wrong one¡¯ to your machine.

I¡¯d recommend you sell the U3 attachment and buy the correct one for the DB200... Or else sell the DB200 lathe itself and replace it with a U3 ?

Friendly regards
Alan
Geneva, Switzerland
Re: Adapting the Unimat 3 Threading Attachment

 

Not really. It would make far more sense to sell it and buy the correct attachment.
Adapting the Unimat 3 Threading Attachment

 

Would it be feasible to adapt the Uni 3 threading attachment to the Unimat DB 200?
Re: Does anyone make new thread guides for the db /sl?

 

¿ªÔÆÌåÓý

Hi Gang:

If what you are tapping is thin, a 26 or 28 tap could cut a usable thread.

Carl.

On 3/1/2023 9:29 PM, Jkle379184 via groups.io wrote:

?I just checked my Unimat SL masters and followers set and these are the ones that I have for inch and Whitworth.
13, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 36, 40, 48, 50, 56 TPI
Some of these are not listed in the unimat catalogs.
?Jeff


-----Original Message-----
From: Jkle379184 via groups.io <jkle379184@...>
To: [email protected] <[email protected]>
Sent: Wed, Mar 1, 2023 5:28 pm
Subject: Re: [Unimat] Does anyone make new thread guides for the db /sl?

1/4" x 27 TPI was used on old electric lamps for brass parts. There are a lot of "odd" ones out there.
?Jeff


-----Original Message-----
From: vt_biketim <tchock59@...>
To: John Entwistle <jentwistle3@...>; [email protected]
Sent: Wed, Mar 1, 2023 4:52 pm
Subject: Re: [Unimat] Does anyone make new thread guides for the db /sl?

This has piqued my curiosity¡ªwhat equipment used 27tpi? It must have been common enough somewhere b/c I just googled it and found it's stupid easy to get 3/4-27tpi taps and dies. Not even that dear, really, the tap is under $25.

Tim in VT

Re: Does anyone make new thread guides for the db /sl?

 

¿ªÔÆÌåÓý

Hi Gang:

The masters have no relationship to the form of the cut thread. The thread form between the master and the follower might not matter either. As a tool designer I would harden the circular guide and use brass for the follower.

Carl.

On 3/2/2023 1:21 AM, Michael McLachlan wrote:

Tim

Metric threads are 60 degrees, the 55degree masters are Whitworth.

Michael
On Thu, Mar 2, 2023 at 12:55 PM, OldToolmaker wrote:
Tim,
The Unimat thread masters I have had were not buttress thread form but ¡°V¡± form. I would assume the metric thread masters are 55 degree thread form but I am not sure and the US version is most likely UNF 60 degree (unified national fine).
Perhaps someone here on this group can clarify this
.
Customized Unimat

 

¿ªÔÆÌåÓý

Hi Gang:

Here is a customized Unimat with several bright ideas:


Take care, Carl.
Is anyone looking for a sl1000? #db200

Sub
 



I have this untouched sl1000 for sale. I'd like to get $550 for it. It comes with the upgraded motor, vertical attachment, headstock handle, tool holder and power feed. Mechanically it is in very nice shape, it only needs a new belt. It looks bad but its just old age grime, and a bit of surface rust that will polish off. I have not even wiped it with a cloth yet - in as found condition. :)

I bought it as a fixer upper, but I have too many projects (And Unimats! - I have another full cherry one available for $750 if anyone is interested). I'm refreshing a maximat 7 now, and thats been my labor of love for some time!?
Re: Does anyone make new thread guides for the db /sl?

 

¿ªÔÆÌåÓý

Ouch!
Clearly a tap is the right answer?
But it is disappointing not to be able to use my ¡°now¡± SL.

Best Regards
John



On Mar 2, 2023, at 8:08 AM, OldToolmaker via groups.io <old_toolmaker@...> wrote:

?Back in about the year 2000 my dad gave me a complete Unimat DB200 he was given by a man who had purchased it new. The man had a terminal illness and knew my dad was a machinist and wanted it to go to someone who would appreciate it.
Some years later after my dad passed away I was cleaning out his shop and came upon several small boxes, each with individual threaded items in them. I had no idea what they were and tossed them into the trash. They were unused in original boxes.
I could still kick myself to this day.

Re: Does anyone make new thread guides for the db /sl?

 

Back in about the year 2000 my dad gave me a complete Unimat DB200 he was given by a man who had purchased it new. The man had a terminal illness and knew my dad was a machinist and wanted it to go to someone who would appreciate it.
Some years later after my dad passed away I was cleaning out his shop and came upon several small boxes, each with individual threaded items in them. I had no idea what they were and tossed them into the trash. They were unused in original boxes.
I could still kick myself to this day.
Re: Does anyone make new thread guides for the db /sl?

 

Tim

Metric threads are 60 degrees, the 55degree masters are Whitworth.

Michael

On Thu, Mar 2, 2023 at 12:55 PM, OldToolmaker wrote:
Tim,
The Unimat thread masters I have had were not buttress thread form but ¡°V¡± form. I would assume the metric thread masters are 55 degree thread form but I am not sure and the US version is most likely UNF 60 degree (unified national fine).
Perhaps someone here on this group can clarify this
.
Re: Does anyone make new thread guides for the db /sl?

 

On Wed, Mar 1, 2023 at 10:17 PM, vt_biketim wrote:
Were they hardened? More to the point, since the followers are brass, can you get away with not hard? And are they cut with a buttress thread form? I've never actually seen a threading attachment.
If the master is made of a decent steel, and the follower brass, they will be OK without hardening. The amount of force on them and the hours of use will be so little that they will be fine. The main thing is to get a decent smooth finish on the master.

All the pictures I've seen - including the one just posted clearly show a "normal" thread, probably 60¡ã. Again the forces don't need anything heftier.
Re: Does anyone make new thread guides for the db /sl?

 

They look simple enough to be 3D printed. I dont think there is much force on them. I could be wrong.
I dont have the dimensions so i'M at a lose to make them. There must be an Sl owner who 3d prints try it.
Dig out your old clock wheels.

 

?

A nice little gem from the past:


DW
Re: Does anyone make new thread guides for the db /sl?

 

¿ªÔÆÌåÓý

The glove box latch on my ¡®65 Lotus Elan is 3/4 x 27

Best Regards
John



On Mar 1, 2023, at 9:29 PM, Jkle379184 via groups.io <jkle379184@...> wrote:

?
?I just checked my Unimat SL masters and followers set and these are the ones that I have for inch and Whitworth.
13, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 36, 40, 48, 50, 56 TPI
Some of these are not listed in the unimat catalogs.
?Jeff


-----Original Message-----
From: Jkle379184 via groups.io <jkle379184@...>
To: [email protected] <[email protected]>
Sent: Wed, Mar 1, 2023 5:28 pm
Subject: Re: [Unimat] Does anyone make new thread guides for the db /sl?

1/4" x 27 TPI was used on old electric lamps for brass parts. There are a lot of "odd" ones out there.
?Jeff


-----Original Message-----
From: vt_biketim <tchock59@...>
To: John Entwistle <jentwistle3@...>; [email protected]
Sent: Wed, Mar 1, 2023 4:52 pm
Subject: Re: [Unimat] Does anyone make new thread guides for the db /sl?

This has piqued my curiosity¡ªwhat equipment used 27tpi? It must have been common enough somewhere b/c I just googled it and found it's stupid easy to get 3/4-27tpi taps and dies. Not even that dear, really, the tap is under $25.

Tim in VT

Re: Does anyone make new thread guides for the db /sl?

 

Hello Bill,
I just found my information on the Atlas 6¡± lathe and it also shows 27 TPI as standard.

I am know my 7x16 MicroMark minilathe can also be configured to cut 27 TPI. I have the mathematical formula to calculate the gear tooth requirements for any thread. Very handy to have.
Re: Does anyone make new thread guides for the db /sl?

 

?I just checked my Unimat SL masters and followers set and these are the ones that I have for inch and Whitworth.
13, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 36, 40, 48, 50, 56 TPI
Some of these are not listed in the unimat catalogs.
?Jeff


-----Original Message-----
From: Jkle379184 via groups.io <jkle379184@...>
To: [email protected] <[email protected]>
Sent: Wed, Mar 1, 2023 5:28 pm
Subject: Re: [Unimat] Does anyone make new thread guides for the db /sl?

1/4" x 27 TPI was used on old electric lamps for brass parts. There are a lot of "odd" ones out there.
?Jeff


-----Original Message-----
From: vt_biketim <tchock59@...>
To: John Entwistle <jentwistle3@...>; [email protected]
Sent: Wed, Mar 1, 2023 4:52 pm
Subject: Re: [Unimat] Does anyone make new thread guides for the db /sl?

This has piqued my curiosity¡ªwhat equipment used 27tpi? It must have been common enough somewhere b/c I just googled it and found it's stupid easy to get 3/4-27tpi taps and dies. Not even that dear, really, the tap is under $25.

Tim in VT

Re: Does anyone make new thread guides for the db /sl?

 

Tim,
The Unimat thread masters I have had were not buttress thread form but ¡°V¡± form. I would assume the metric thread masters are 55 degree thread form but I am not sure and the US version is most likely UNF 60 degree (unified national fine).
Perhaps someone here on this group can clarify this
.
5541 - 5560 of 64888