开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. UI-View
  2. Topics

UI-View keeps quitting?

 

My UI-View keeps quitting! It stops updating incoming packets and sits with no terminal updates and no beacons being sent. When I try the Control C and enter a command, it seems frozen. I then go to set-up and restart the communications to the modem by reloading the startup parameters, and it starts to spew saved incoming packets, updating the map, filling the terminal with all the halted packets . Almost like Flow Control stopped it, and an X-on seemed to restart things. However, me inputing X-on had no effect. I've tried different TNCs, Paccomm Handipacket, TNC-2, PTC-2, and AEA PK232 and they all do the same. I 'feel' it's a parameter that's set wrong, but never found it. It usually runs for several hours before quitting. Any ideas?
TNX es 73 - Mike VE3EQP .....>
K Wesolowski KD7DFV
 

Is the program installed at the root level?

Kevin
KD7DFV

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Michael Pupeza
Sent: Thursday, April 20, 2023 05:21
To: [email protected]
Subject: [UI-View] UI-View keeps quitting?

My UI-View keeps quitting! It stops updating incoming packets and sits with no terminal updates and no beacons being sent. When I try the Control C and enter a command, it seems frozen. I then go to set-up and restart the communications to the modem by reloading the startup parameters, and it starts to spew saved incoming packets, updating the map, filling the terminal with all the halted packets . Almost like Flow Control stopped it, and an X-on seemed to restart things. However, me inputing X-on had no effect. I've tried different TNCs, Paccomm Handipacket, TNC-2, PTC-2, and AEA PK232 and they all do the same. I 'feel' it's a parameter that's set wrong, but never found it. It usually runs for several hours before quitting. Any ideas?
TNX es 73 - Mike VE3EQP .....>
 

Hi

Try changing the comms set up to KISS mode.

73
Jeff G8HUL

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Michael Pupeza
Sent: 20 April 2023 13:21
To: [email protected]
Subject: [UI-View] UI-View keeps quitting?

My UI-View keeps quitting! It stops updating incoming packets and sits with no terminal updates and no beacons being sent. When I try the Control C and enter a command, it seems frozen. I then go to set-up and restart the communications to the modem by reloading the startup parameters, and it starts to spew saved incoming packets, updating the map, filling the terminal with all the halted packets . Almost like Flow Control stopped it, and an X-on seemed to restart things. However, me inputing X-on had no effect. I've tried different TNCs, Paccomm Handipacket, TNC-2, PTC-2, and AEA PK232 and they all do the same. I 'feel' it's a parameter that's set wrong, but never found it. It usually runs for several hours before quitting. Any ideas?
TNX es 73 - Mike VE3EQP .....>

1 - 3 of 3