Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
THD7E
|
"babel" <[email protected]
Hi all.
I still can't get my THD7E working with GPS and UI-VIEW successfully. I've followed previous advice from Roger and others with little progress. I expect to see my mobile icon when moving and receiving my valid GPS data connected to the THD7E but all I see is my home position. I do have enabled a short mobile beacon interval 2mins. If I disable the home beacon interval I still do not appear mobile. Help please! Below is a 'dump' of what I see in the terminal window, which proves the GPS is talking through the Kenwood radio and is being 'seen' by UI-VIEW v2.16b. bbRAM loaded with defaults TASCO Radio Modem AX.25 Level 2 Version 2.0 Release 08/18/98 2Chip ver 1.00 Checksum $F0 cmd:CONOK OFF CONOK OFF CONOK was ON cmd:LOC E 5 LOC E 5 LOCATION was EVERY 0 cmd:LTMON 5 LTMON 5 LTMON was 0 cmd:BEACON EVERY 0 BEACON EVERY 0 BEACON was EVERY 0 cmd:MYCALL G7KCV-1 MYCALL G7KCV-1 MYCALL was NOCALL cmd:UNPROTO CQ MY G7KCV-1 MYCALL was G7KCV-1 cmd:PORTO $0000 PORTOUT was $0000 cmd:G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185159,5243.356,N,00206.727,W,35,2.0,0, ,000,1*2B G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185203,5243.357,N,00206.725,W,35,2.0,0,,000 ,1*24 G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185209,5243.360,N,00206.723,W,35,2.0,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185213,5243.361,N,00206.721,W,35,2.0,0,,000 ,1*24 G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185219,5243.363,N,00206.719,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185223,5243.364,N,00206.717,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185229,5243.367,N,00206.717,W,35,1.6,0,,000 ,1*2B G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185233,5243.366,N,00206.714,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185239,5243.367,N,00206.711,W,35,1.6,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185243,5243.368,N,00206.710,W,35,1.6,0,,000 ,1*2F |
|
Ian Wade <[email protected]
In article <002901bf5856$be917a20$0300a8c0@libretto>, babel
<babel@...> writes G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185203,5243.357,N,00206.725,W,35,2.0,0,,000 Is "$PNTS" a standard NMEA sentence? I haven't seen it before. 73 Ian, G3NRW -- +-----------------------------------------------------------------+ | APRS on 144.800 [IO91SX] ~55km/35 miles NNW of London | | email: g3nrw@... | | | | APRS PROTOCOL SPEC: +-----------------------------------------------------------------+ |
|
Roger Barker <[email protected]
In article <002901bf5856$be917a20$0300a8c0@libretto>, babel
<babel@...> writes Hi all.[snip] G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185203,5243.357,N,00206.725,W,35,2.0,0,,000Etc... UI-View doesn't understand $PNTS, because it's not something that a mobile would normally transmit. You need to configure the TH-D7E GPSTEXT parameter to an NMEA sentence that UI-View does understand, try adding "GPSTEXT $GPRMC" to the CMD file. I *think* it should then work, but I can't test it because Kenwood UK took my loan TH-D7E back a few months ago. :-( -- Roger Barker, G4IDE roger@... Boston Lincolnshire, UK |
|
Ciemon G0TRT
Hi all,
toggle quoted message
Show quoted text
You can't use UI-View and the D7 with GPS as a "smart tracker", it doesn't work as it should. UI-View doesn't see the data from the GPS via the D7. I've played with it a lot and had no success in getting this to work properly. It's possible to bodge it, but all you end up with is UI-View messaging with a dumb tracker. Whilst it "works" you can't use the UI-View "smart tracker" features i.e. tx timing. 73......Ciemon Dunville G0TRT email: g0trt@... Loc: 5207.25N 00058.23E www: Tel: +44 (0)7715 104275 ICQ: 6263612 -----Original Message-----
From: babel [mailto:babel@...] Sent: 06 January 2000 14:59 To: UIVIEW Subject: [ui-view] THD7E Hi all. I still can't get my THD7E working with GPS and UI-VIEW successfully. I've followed previous advice from Roger and others with little progress. I expect to see my mobile icon when moving and receiving my valid GPS data connected to the THD7E but all I see is my home position. I do have enabled a short mobile beacon interval 2mins. If I disable the home beacon interval I still do not appear mobile. Help please! Below is a 'dump' of what I see in the terminal window, which proves the GPS is talking through the Kenwood radio and is being 'seen' by UI-VIEW v2.16b. bbRAM loaded with defaults TASCO Radio Modem AX.25 Level 2 Version 2.0 Release 08/18/98 2Chip ver 1.00 Checksum $F0 cmd:CONOK OFF CONOK OFF CONOK was ON cmd:LOC E 5 LOC E 5 LOCATION was EVERY 0 cmd:LTMON 5 LTMON 5 LTMON was 0 cmd:BEACON EVERY 0 BEACON EVERY 0 BEACON was EVERY 0 cmd:MYCALL G7KCV-1 MYCALL G7KCV-1 MYCALL was NOCALL cmd:UNPROTO CQ MY G7KCV-1 MYCALL was G7KCV-1 cmd:PORTO $0000 PORTOUT was $0000 cmd:G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185159,5243.356,N,00206.727,W,35,2.0,0, ,000,1*2B G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185203,5243.357,N,00206.725,W,35,2.0,0,,000 ,1*24 G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185209,5243.360,N,00206.723,W,35,2.0,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185213,5243.361,N,00206.721,W,35,2.0,0,,000 ,1*24 G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185219,5243.363,N,00206.719,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185223,5243.364,N,00206.717,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185229,5243.367,N,00206.717,W,35,1.6,0,,000 ,1*2B G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185233,5243.366,N,00206.714,W,35,1.8,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185239,5243.367,N,00206.711,W,35,1.6,0,,000 ,1*2C G7KCV-1>GPS:$PNTS,1,0,05,01,2000,185243,5243.368,N,00206.710,W,35,1.6,0,,000 ,1*2F --------------------------- ONElist Sponsor ---------------------------- GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU! Tired of filling out forms and remembering passwords? Gator fills in forms and passwords with just one click! Comes with $50 in free coupons! <a href=" ">Click Here</a> ------------------------------------------------------------------------ |
to navigate to use esc to dismiss