¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Set Up KISS parameters in UI-VIEW + RIGEXPERT + MIXW (add Virtual emulation port)


 

Dear Colleague,

After installed the above described configuration I'm able to correctly transmit (1200/144.800 MHZ) but no chances to receive packet messages on UI-VIEW monitor screen and related informations on the MAP

Someone has in place similar environment?
Someone could provide me KISS parameters?

Any suggestion is welcome

Many thanks in advance

IK1BHS
Attilio Martino


 

Attilio IK1BHS wrote...

After installed the above described configuration>
I'm able to correctly transmit (1200/144.800 MHZ)
but no chances to receive packet messages on UI-View
monitor screen and related informations on the MAP
It's been over three weeks since you posted and I
couldn't see any replies.

RIGEXPERT is a sound card interface and MIXW is the
software you are running for it. I'm not using either
one of them, so don't have any direct experience with
them. I did a search and did find that MIXW can emulate
KISS mode, at least since ver 2.04. Does anything
on the following page point you in the right direction?



I'm sure you would get better support on a RIGEXPERT
or MIXW group, but I'm sure there must be some users
here!

--
73 Keith VE7GDH
"I may be lost, but I know exactly where I am!"


Martino Mello
 

Dear Keith VE7GDH,
First of all...many thanks for your kind attention to this matter...After several test, compliant with your opinion...I found the problem in the USB port system and installing specific software I solved the problem
Many thanks once again for your real friendship
De IK1BHSAttilio


 

Dear Keith VE7GDH,


First of all...many thanks for your kind attention to this matter...
After several test, compliant with your opinion...I found the problem in the USB port system and installing specific software I solved the problem


Many thanks once again for your real friendship


De IK1BHS
Attilio


 

Dear Keith VE7GDH,


First of all...many thanks for your kind attention to this matter...
After several test, compliant with your opinion...I found the problem in the USB port system and installing specific software I solved the problem


Many thanks once again for your real friendship


De IK1BHS
Attilio