|
Good morning everyone. Need some help with my home APRS setup. I'am running UI-View and want to limit my feed from the online server to 50km from my location. After much reading on the internet I have tried using logon filter commands to do this. What I have tried is filter r/34/-88/50, filter m/50 and a combination of both filter r/34/-88/50 m/50. I have placed these in the text to send on connection and or the extra text to send on connection boxes in the aprs server setup. No matter what I have tried I still get the full feed. I'm logging on to the NOAM server to test this. So what am I doing wrong. Thanks ahead for the help.
Jeff
kb5nmb
|
Hi Jeff,
Which port do you use? Try a server with port 14580.
You may also send a filter command as a message to "SERVER".
73, Manfred
|
Hi Manfred,
With some guidance from Pete on the APRS group I now have it working. Thanks for your response. 73
Jeff
kb5nmb
toggle quoted message
Show quoted text
On Nov 8, 2022, at 1:27 PM, Manfred Baben <ea1847@...> wrote:
?Hi Jeff,
Which port do you use? Try a server with port 14580.
You may also send a filter command as a message to "SERVER".
73, Manfred
|
Hey Jeff, I’m just getting back to using Ui-view 32 and it took me a little bit to get stuff going again. I use the Extra text to send box with filter m/50 .
Make sure your server address is using port 15480 .
Rick N1RCW
|
Hi Jeff, I use the m/50 command in the Extra log on text box.
filter m/50
Also make sure your server address is using port 14580
I use the 137.220.54.84:14580 server T2CAEAST
73's Rick N1RCW
|
Hi Rick,
I’m using 14580 port and was still having trouble. With some help from Pete over in the APRS group I got it figured out and going. I apperantly had something stuck out there somewhere. I cleared the filter text box, saved and reconnected to the server with no filter and got nothing, as it should be. I then put the command back in as FILTER r/34/-89/200 and it started working. Thanks for your response.
73 Jeff
kb5nmb
toggle quoted message
Show quoted text
On Nov 8, 2022, at 1:44 PM, N1RCW <rwtech61@...> wrote:
?Hi Jeff, I use the m/50 command in the Extra log on text box.
filter m/50
Also make sure your server address is using port 14580
I use the 137.220.54.84:14580 server T2CAEAST
73's Rick N1RCW
|
Jeff - here is my filter
It is set for 300 miles around 34, -112
toggle quoted message
Show quoted text
On Tue, Nov 8, 2022, 09:33 Jeff KB5NMB <kb5nmb@...> wrote: Good morning everyone. Need some help with my home APRS setup. I'am
running UI-View and want to limit my feed from the online server to 50km
from my location. After much reading on the internet I have tried using
logon filter commands to do this. What I have tried is filter r/34/-88/50,
filter m/50 and a combination of both filter r/34/-88/50 m/50. I have
placed these in the text to send on connection and or the extra text to
send on connection boxes in the aprs server setup. No matter what I have
tried I still get the full feed. I'm logging on to the NOAM server to test
this. So what am I doing wrong. Thanks ahead for the help.
Jeff
kb5nmb
|
Thanks for that. Pete on the APRS group gave me some guidance and I got it going. Mine now looks like yours.
Jeff
kb5nmb
toggle quoted message
Show quoted text
On Nov 8, 2022, at 5:12 PM, K Wesolowski KD7DFV <KD7DFV@...> wrote:
?Jeff - here is my filter
It is set for 300 miles around 34, -112
On Tue, Nov 8, 2022, 09:33 Jeff KB5NMB <kb5nmb@...> wrote:
Good morning everyone. Need some help with my home APRS setup. I'am
running UI-View and want to limit my feed from the online server to 50km
from my location. After much reading on the internet I have tried using
logon filter commands to do this. What I have tried is filter r/34/-88/50,
filter m/50 and a combination of both filter r/34/-88/50 m/50. I have
placed these in the text to send on connection and or the extra text to
send on connection boxes in the aprs server setup. No matter what I have
tried I still get the full feed. I'm logging on to the NOAM server to test
this. So what am I doing wrong. Thanks ahead for the help.
Jeff
kb5nmb
|
jeff, i am curious,do you have a tnc and a radio connected to it at 144.390? or you are just connected at a server on internet? gervais ve2ckn ________________________________ De : [email protected] < [email protected]> de la part de Jeff KB5NMB <kb5nmb@...> Envoyé : 8 novembre 2022 18:19 ? : [email protected] < [email protected]> Objet : Re: [UI-View] server flter Thanks for that. Pete on the APRS group gave me some guidance and I got it going. Mine now looks like yours. Jeff kb5nmb
On Nov 8, 2022, at 5:12 PM, K Wesolowski KD7DFV <KD7DFV@...> wrote:
?Jeff - here is my filter
It is set for 300 miles around 34, -112
On Tue, Nov 8, 2022, 09:33 Jeff KB5NMB <kb5nmb@...> wrote:
Good morning everyone. Need some help with my home APRS setup. I'am
running UI-View and want to limit my feed from the online server to 50km
from my location. After much reading on the internet I have tried using
logon filter commands to do this. What I have tried is filter r/34/-88/50,
filter m/50 and a combination of both filter r/34/-88/50 m/50. I have
placed these in the text to send on connection and or the extra text to
send on connection boxes in the aprs server setup. No matter what I have
tried I still get the full feed. I'm logging on to the NOAM server to test
this. So what am I doing wrong. Thanks ahead for the help.
Jeff
kb5nmb
|
Garvais,
I have a Yeasu FT-2800 and MFJ-1274 on the rf side.
Jeff
kb5nmb
toggle quoted message
Show quoted text
On Nov 8, 2022, at 5:29 PM, Gervais Fillion <ve2ckn2@...> wrote:
?jeff,
i am curious,do you have a tnc and a radio connected to it at 144.390?
or
you are just connected at a server on internet?
gervais ve2ckn
________________________________
De : [email protected] <[email protected]> de la part de Jeff KB5NMB <kb5nmb@...>
Envoyé : 8 novembre 2022 18:19
? : [email protected] <[email protected]>
Objet : Re: [UI-View] server flter
Thanks for that. Pete on the APRS group gave me some guidance and I got it going. Mine now looks like yours.
Jeff
kb5nmb
On Nov 8, 2022, at 5:12 PM, K Wesolowski KD7DFV <KD7DFV@...> wrote:
?Jeff - here is my filter
It is set for 300 miles around 34, -112
On Tue, Nov 8, 2022, 09:33 Jeff KB5NMB <kb5nmb@...> wrote: Good morning everyone. Need some help with my home APRS setup. I'am
running UI-View and want to limit my feed from the online server to 50km
from my location. After much reading on the internet I have tried using
logon filter commands to do this. What I have tried is filter r/34/-88/50,
filter m/50 and a combination of both filter r/34/-88/50 m/50. I have
placed these in the text to send on connection and or the extra text to
send on connection boxes in the aprs server setup. No matter what I have
tried I still get the full feed. I'm logging on to the NOAM server to test
this. So what am I doing wrong. Thanks ahead for the help.
Jeff
kb5nmb
|
well i just closed my Igate here,, years of no users !! on mine i used to have Filter m/200 and it worked no1 , and all the square choice on the Right were ALL selected i add it for 15-20 years i dont remember and here now where i am near Fort Kent,maine,,Edmunston,NB et my village Pohenegamook,Quebec i dont have much traffic so i decided to close it. Uiview when well adjust is one of the best software and,,,,,simple. 73/s gervais ve2ckn riviere-bleue,quebec ________________________________ De : [email protected] < [email protected]> de la part de Jeff KB5NMB <kb5nmb@...> Envoyé : 8 novembre 2022 18:33 ? : [email protected] < [email protected]> Objet : Re: [UI-View] server flter Garvais, I have a Yeasu FT-2800 and MFJ-1274 on the rf side. Jeff kb5nmb
On Nov 8, 2022, at 5:29 PM, Gervais Fillion <ve2ckn2@...> wrote:
?jeff,
i am curious,do you have a tnc and a radio connected to it at 144.390?
or
you are just connected at a server on internet?
gervais ve2ckn
________________________________
De : [email protected] <[email protected]> de la part de Jeff KB5NMB <kb5nmb@...>
Envoyé : 8 novembre 2022 18:19
? : [email protected] <[email protected]>
Objet : Re: [UI-View] server flter
Thanks for that. Pete on the APRS group gave me some guidance and I got it going. Mine now looks like yours.
Jeff
kb5nmb
On Nov 8, 2022, at 5:12 PM, K Wesolowski KD7DFV <KD7DFV@...> wrote:
?Jeff - here is my filter
It is set for 300 miles around 34, -112
On Tue, Nov 8, 2022, 09:33 Jeff KB5NMB <kb5nmb@...> wrote: Good morning everyone. Need some help with my home APRS setup. I'am
running UI-View and want to limit my feed from the online server to 50km
from my location. After much reading on the internet I have tried using
logon filter commands to do this. What I have tried is filter r/34/-88/50,
filter m/50 and a combination of both filter r/34/-88/50 m/50. I have
placed these in the text to send on connection and or the extra text to
send on connection boxes in the aprs server setup. No matter what I have
tried I still get the full feed. I'm logging on to the NOAM server to test
this. So what am I doing wrong. Thanks ahead for the help.
Jeff
kb5nmb
|
Hate you closed it but if no one is on no use to have it up. Been using UI-View since early 2000’s. As you said simple and it works.
Jeff
kb5nmb
toggle quoted message
Show quoted text
On Nov 8, 2022, at 5:37 PM, Gervais Fillion <ve2ckn2@...> wrote:
?well
i just closed my Igate here,,
years of no users !!
on mine i used to have Filter m/200 and it worked no1 ,
and all the square choice on the Right were ALL selected
i add it for 15-20 years i dont remember and here now where i am near Fort Kent,maine,,Edmunston,NB et my village Pohenegamook,Quebec i dont have much traffic so i decided to close it.
Uiview when well adjust is one of the best software and,,,,,simple.
73/s
gervais ve2ckn
riviere-bleue,quebec
________________________________
De : [email protected] <[email protected]> de la part de Jeff KB5NMB <kb5nmb@...>
Envoyé : 8 novembre 2022 18:33
? : [email protected] <[email protected]>
Objet : Re: [UI-View] server flter
Garvais,
I have a Yeasu FT-2800 and MFJ-1274 on the rf side.
Jeff
kb5nmb
On Nov 8, 2022, at 5:29 PM, Gervais Fillion <ve2ckn2@...> wrote:
?jeff,
i am curious,do you have a tnc and a radio connected to it at 144.390?
or
you are just connected at a server on internet?
gervais ve2ckn
________________________________
De : [email protected] <[email protected]> de la part de Jeff KB5NMB <kb5nmb@...>
Envoyé : 8 novembre 2022 18:19
? : [email protected] <[email protected]>
Objet : Re: [UI-View] server flter
Thanks for that. Pete on the APRS group gave me some guidance and I got it going. Mine now looks like yours.
Jeff
kb5nmb
On Nov 8, 2022, at 5:12 PM, K Wesolowski KD7DFV <KD7DFV@...> wrote: ?Jeff - here is my filter
It is set for 300 miles around 34, -112
On Tue, Nov 8, 2022, 09:33 Jeff KB5NMB <kb5nmb@...> wrote: Good morning everyone. Need some help with my home APRS setup. I'am
running UI-View and want to limit my feed from the online server to 50km
from my location. After much reading on the internet I have tried using
logon filter commands to do this. What I have tried is filter r/34/-88/50,
filter m/50 and a combination of both filter r/34/-88/50 m/50. I have
placed these in the text to send on connection and or the extra text to
send on connection boxes in the aprs server setup. No matter what I have
tried I still get the full feed. I'm logging on to the NOAM server to test
this. So what am I doing wrong. Thanks ahead for the help.
Jeff
kb5nmb
|
In the menu above the map window:
Click SETUP> Exclude/Include List> in the menu that appears on the lower right set the > exclude stations more than XXX miles away.
50km is about 31 miles
This setting will remove all stations from your map farther away than the distant set. If you have RF stations you need to see it will not let you see them.
Mike KB7WUK
---------------------------------------------------
toggle quoted message
Show quoted text
On 11/8/2022 08:33, Jeff KB5NMB wrote: Good morning everyone. Need some help with my home APRS setup. I'am running UI-View and want to limit my feed from the online server to 50km from my location. After much reading on the internet I have tried using logon filter commands to do this. What I have tried is filter r/34/-88/50, filter m/50 and a combination of both filter r/34/-88/50 m/50. I have placed these in the text to send on connection and or the extra text to send on connection boxes in the aprs server setup. No matter what I have tried I still get the full feed. I'm logging on to the NOAM server to test this. So what am I doing wrong. Thanks ahead for the help.
Jeff
kb5nmb
|
Thanks Mike,
Got the problem figured out with Pete’s help over on the APRS io group.
Jeff
kb5nmb
toggle quoted message
Show quoted text
On Nov 10, 2022, at 6:50 AM, Mike Hemel via groups.io <kb7wuk@...> wrote:
?In the menu above the map window:
Click SETUP> Exclude/Include List> in the menu that appears on the lower right set the > exclude stations more than XXX miles away.
50km is about 31 miles
This setting will remove all stations from your map farther away than the distant set. If you have RF stations you need to see it will not let you see them.
Mike KB7WUK
---------------------------------------------------
On 11/8/2022 08:33, Jeff KB5NMB wrote:
Good morning everyone. Need some help with my home APRS setup. I'am running UI-View and want to limit my feed from the online server to 50km from my location. After much reading on the internet I have tried using logon filter commands to do this. What I have tried is filter r/34/-88/50, filter m/50 and a combination of both filter r/34/-88/50 m/50. I have placed these in the text to send on connection and or the extra text to send on connection boxes in the aprs server setup. No matter what I have tried I still get the full feed. I'm logging on to the NOAM server to test this. So what am I doing wrong. Thanks ahead for the help.
Jeff
kb5nmb
|
Gervais Fillion