Any other users of the KAM+ on the list please?
If so, have you managed to solve the following problem with this TNC?
When using Host Mode (i.e., selecting 'NONE' mode in Comms Setup) incoming
UI frames from other users have the VHF identifier /V added. This means
that if I send a packet 'Hello' to, say, M0BCU-3 the following happens:-
KAM+ sends -
G0DJA-3>M0BCU-3: ~Hello~00
KAM+ receives an ACK, but decodes it as -
M0BCU-3>G0DJA-3/V: ~00
So UI-View doesn't recognise this as my callsign, not surprisingly, and
resends the message ~Hello~. M0BCU-3 responds with an ACK, but the KAM+
still doesn't recognise it as my callsign.
I've looked through the KAM+ instruction manual, but cannot see how to turn
off the /V from received packets in UI frames.
I would like, eventually, to use UI-View on HF as well as VHF, so would
prefer to be able to use NONE mode, rather than KISS (which works OK) which
seems only to address the VHF port on the KAM+.
Any ideas please?
Thanks de Dave (G0DJA)
