开云体育

well i just closed my Igate here,, years of no users !! on mine i used to have Filter m/200 and it worked no1 , and all the square choice on the Right were ALL selected i add it for 15-20 years i

Garvais, I have a Yeasu FT-2800 and MFJ-1274 on the rf side. Jeff kb5nmb

jeff, i am curious,do you have a tnc and a radio connected to it at 144.390? or you are just connected at a server on internet? gervais ve2ckn ________________________________ De : [email protected]

Thanks for that. Pete on the APRS group gave me some guidance and I got it going. Mine now looks like yours. Jeff kb5nmb

Jeff - here is my filter It is set for 300 miles around 34, -112

Hi Rick, I’m using 14580 port and was still having trouble. With some help from Pete over in the APRS group I got it figured out and going. I apperantly had something stuck out there somewhere. I

Hi Jeff, I use the m/50 command in the Extra log on text box. filter m/50 Also make sure your server address is using port 14580 I use the 137.220.54.84:14580 server T2CAEAST 73's Rick N1RCW

Hey Jeff, I’m just getting back to using Ui-view 32 and it took me a little bit to get stuff going again. I use the Extra text to send box with filter m/50 . Make sure your server address is using

Hi Manfred, With some guidance from Pete on the APRS group I now have it working. Thanks for your response. 73 Jeff kb5nmb

Hi Jeff, Which port do you use? Try a server with port 14580. You may also send a filter command as a message to "SERVER". 73, Manfred

Hi Chuck, Two things I can think of right off is make sure you got that big long number in exact. And 2nd make sure your not using the one issued for future expansion if that one was also given to

Hi I have been away from APRS for several years. I installed UI-VIEW 32 and my information is not working. Can anyone help with this? Thanks Chuck N4UED

Good morning everyone. Need some help with my home APRS setup. I'am running UI-View and want to limit my feed from the online server to 50km from my location. After much reading on the internet I have

I did enter one one time but did not remember the right format. I now am up and running thanks to you. Just for information the filter definition page is not working as referred to on this

Did you configure a filter?? IIRC, UI-View defaults to no filter which means no packets from the APRS-IS. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

I sent my notebook in to Dell for repair and they formatted my drive so I lost my UI-View program and starting all over. I am attached to the server but no stations are coming on the screen. Any

Stephen WA8LMF wrote… (way back in April) Thanks for pointing that out. I had actually forgotten about the setting for “receive only”. I can see now that there is a good reason for it to

?Yes...??? The ONLY APRS client that can cache scalable vector-based map into locally. The author has actually converted the entire Open Street Map database for the US and Canada to a format that

Hummmmm have not heard of this one. Will give it a look. Jeff Kb5nmb

I started using UI-View in 2003 and still have a copy running to monitor telemetry from two digipeaters. I am surprised that no one has mentioned YAAC (Yet Another APRS Client).? Plenty of features,