开云体育

The UI-View Group is very active. Most already do so, but here are some some guidelines to follow. 1. Civility... this is practiced well by our members! 2. Sign your messages with your name and

This message is sent to all new members, and to all members every now and then. It has been revised as bounce reports have changed a bit. Any of us could experience no longer receiving email from

Unfortunately, ?If one wants to use a map for a fixed site monitoring, with some diddling it can be done. ?It's a pain.When I started out about 10 years ago, UI-View and PM was the easiest program

1) Static maps (i.e. fixed, non-zooming bitmap "pictures of maps") captured from Google maps, Expedia, Open Streets, etc. A useful tool for capturing and tiling multiple "screenfulls" from these

What are you using for maps since PMP is no longer available? Thanks

This message is sent to all new members, and to all members every now and then. It has been revised as bounce reports have changed a bit. Any of us could experience no longer receiving email from

The UI-View Group is very active. Most already do so, but here are some some guidelines to follow. 1. Civility... this is practiced well by our members! 2. Sign your messages with your name and

hi stephen "Why are you even bothering with this archaic piece of hardware when the soundcard-based "UZ7HO Soundmodem" software TNC will vastly outperform it?" well because i still have it and it

<SNIP> The TNC init .CMD file only deals with settings internal to the TNC; not the port/parity/baudrate it is connected to on a given system. In UIview, go to "Setup, Comms Setup" (the same

hi too all well i just try too start my PK232 and my Uiview and i received a popup window about the files pk-232.cmd too be edited, i am working on com1 here, ;This is a sample TNC initialisation

There is something seriously screwed up here!!! UIview DOES NOT need massive amounts of com

The logon and validation are irrelevant. The local server doesn't have the kind of full-blown user validation that a "real" server has. You are just sending "trash" back to the first machine. Note

This message is sent to all new members, and to all members every now and then. It has been revised as bounce reports have changed a bit. Any of us could experience no longer receiving email from

The UI-View Group is very active. Most already do so, but here are some some guidelines to follow. 1. Civility... this is practiced well by our members! 2. Sign your messages with your name and

I have UI VIEW working on a Windows 7 PC. It is has a VHF Radio and a TNC-X connected to it and it is getting a bunch of stations from the internet and from RF. In the APRS Server Setup I have Enable

Here is an issue I had with bad packets with bad call signs and wx data Chuck Chuck, Just FYI, I reported the issue to the manufacturer, and they released a firmware fix. My iGate is

Brian KJ4TDM wrote… Just a guess, but perhaps RF was being picked up by the cable between the radio and the TNC and corrupting the data stream somewhere after error detection is done. -- 73 Keith

Well since the last time we spoke about this issue i have had no more problems. I didn't really do anything but moved the PTT cable that goes from the radio to the TNC, whatever works! If it starts

Mike N7ZEF wrote… I know you said that the file exists, but how many minutes do you have the maximum age set for in the WX Station Setup? The next time you catch it not sending, look at the date