开云体育

In a flash of brilliance, Andy noted: This was exactly the problem. Why? Because I'm experimenting with meteor scatter using WinAPRS and now UI-View. I've written two articles on the method for US

the it beacon text be

Subject: RE: [ui-view] Use of single port laptops so problem? wel in a nutshell yes !! well i do anyway and i went and bought a usb to serial convertor from maplins for 26 i also got one from pc w

Hi Ev Have you in Setup -> Station setup defined your latitude and lonitude co-ordinates. UI-Path requires this to work. As mentioned in the personal e-mail if this does not cure it please could you

In article <7002121610012000/A21667/EBWDMS/11E1540B3B00*@MHS>, lawrence.hill@... writes I can't reproduce it. I can feed your example into the program, and it behaves correctly, so it's not just

Roger, A few times recently I have noticed that the station that I am reporting as my best dx, I have in fact heard via a digipeater. I have only noticed it with two stations so far (one a PA0xxx and

Taking advantage of the recent upgrade and being in the fortunate position of having a fast direct internet connection I have activated the Rx only link to the Internet for signals received by G0UOY

In article <38793C03.14FBBFF4@...>, Clifford Boand <cboand@...> writes Although it's not the cause of your problem, you're misunderstanding auto-refresh. If you want stations to build up,

Oops...As soon as I press "OK" I get . . . Followed by "Illegal Function Call" Ev, W2EV -- PropNET: A digital wireless data network designed to plot band openings in near real-time. Intreagued?

Hi Andy, Thanks for the change in error handling. Now I get a message that simply says "An error has occured in starting UI-Path". We're getting closer :o). Does this help to point in any good

<slaps forehead> OLDham rally. O-L-D-ham rally. Thats what I typed!... (ruddy computers) Carl gw0tqm carl_mail@... gw0tqm@...

Bolton Rally next week. Usually a good venue. Anyone going? I hope to - and will have the digipeater on in the car when en-route - there isnt obviously any ui view in the area, but it is high up, so

I once had ui-view up and running in KISS mode, using a KPC-3 TNC. All was well. Since that time, about 3 weeks ago, I haven't been able to get any stations to show up on my map (here in the u.s.). I

Thanks Ian, looking now :)

In article <02dd01bf5aee$61d79d60$0100007f@nrw>, Nick <nick@...> writes Hi Nick. Have you seen the APRS Protocol Specification? This should answer a lot of questions (and make you think of

The only other solution that I've seen, is if your Laptop PC has USB ports. Bob (G7PAF) bought a USB extension card that gave him a second COM port. Which worked. HTH de Dave (G0DJA)

Nah, just do a deal with a pet shop to replace all the Hampsters that it eats. :-) De Dave (G0DJA)

I spoke to Andrew the other day, he was aware of the problem. So everyone can stop worrying. :-) Cheers de Dave (G0DJA)

Hi All The following has been fixed in the recently uploaded Version 1.6f to onelist: Now works with UI-View APRS Local Server Detects if you want Km or Miles On startup reports what the real error is