开云体育

Roger from today, we are 3 OMs using UI-VIEW under the same QTH jn45rq (45.41.40N 9.25.33E) more or less 300 meters far from each other.... If All are on the air....

In article <3872EAA2.6C0E71BF@...>, Ev Tupis (W2EV) <propnet@...> writes It doesn't redraw everything each time a new icon appears, it only redraws when an existing icon changes. You

Hi all, Slightly off topic. Help please. I wonder if anyone has a spare/unwanted PIC programmed/unprogrammed for use with the $20 GPS Receiver. Happy 2000, Pauline G7SPT@GB7ZZZ

In article <947055195.15898@...>, surf@... writes 1. In "Station Setup", set an interval for your internet beacon. 2. Read the "APRS Serve" section of the help, there's some good

In message <3872EAA2.6C0E71BF@...>, Ev Tupis (W2EV) <propnet@...> writes Hi Ed, The expire time can be set by the user from Setup - Miscellaneous. Pressing the F1 key whilst you

i have UI-VIEW v2.16b now xmitting on the inet. if i am right the problem was i was not changing the port to I instead of port 1. had several chats last night and all seemed to be working fine and

Thanks Karl, Had a bit of a battle downloading the new file myself - was being cached by my Wingate Proxy agent. Looks good now. 73, Alan Wallace ZL1AMW Email: alan.wallace@...

Hi all, Slightly off topic. Help please. I wonder if anyone has a spare/unwanted PIC programmed/unprogrammed for use with the $20 GPS Receiver. Happy 2000, Pauline G7SPT@GB7ZZZ

Hmm. rats. I did it again... :) Carl gw0tqm carl_mail@... gw0tqm@...

Dave Ackrill wrote: That is interesting information to have. I guess I didn't realize it until I had a lot of icons to redraw. I suppose this infers that processor and video card speed has a direct

Hello all I have trouble here with the UI-View using version 2.16 , It is not transmitting to the internet. I getting total no responce (ack) from stations at all. It works fine out to the VHF port

I think the last bit in square brackets says it all really :-) or :-( depending upon your point of view <Grin> May I suggest adding it to the 'Extras' file in the File area of Onelist

Excuse the smile here :-) That instruction (hitting 'Enter') isn't only in the help file, it's on the screen, printed on the dialogue box. I'm trying not to sound sarcastic, honest, but it

I can confirm that all the stations which I, temporarily, put in the excluded list stayed there even if I put another station in later. I wonder if it's as simple as forgetting to hit 'enter' after

I didn't see Ian, but here's a few West Midlands stations that are often plotted from up here:- G1ZRN - Kidderminster G8VPR - Cannock 2E1EQJ - Telford G7OCW - Telford G0CER - Telford If I get

That's actually normal! When you get a few hundred, or even a thousand, plots as you will from the Internet APRServer, then it can get to be very noticable. I use my KAM+ in KISS mode, and it works

i forgot to mention in the previous note that i am running the latest Beta version. Norm

can someone help this old dummy, i have went over and over on the setup and thru the help files but cant get ui-view to transmitt on the internet. it does just fine on the vhf radio side. can someone

Thanks for the tips Roger I was working from memory with most of it and do have the 1448 as the port i just added a few more digits than needed in the write up. anyone else tried it yet

In article <000901bf56e9$7d511de0$23212121@down>, Andy Pritchard <apritch@...> writes I disabled it a long time ago. It was causing too much aggro. The problem was that someone would intend to