Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Digi Settings
I followed all the settings in both the "firmware" documentation and posts on here and yet to get my TT4 to digi. I can see beacons on a handheld but it does not appear to be making it anywhere else. Here is settings. Thoughts ??
:disp
BANK is 0
P300 is FALSE
TXTDISP is FALSE
NODISP is FALSE
PPATHING is FALSE
DMSDISP is FALSE
MICETMV is FALSE
ENTS is FALSE
TELHIRES is FALSE
TELVOLT is TRUE
TELTEMP is TRUE
PREEMPT is FALSE
DIGIID is TRUE
WXPOS is TRUE
TELREAD is TRUE
FRAWDISP is FALSE
HRAWDISP is FALSE
WYPTXT is FALSE
PKTICOM is TRUE
PKTOCOM is TRUE
RPATHDISP is FALSE
LEDS is TRUE
PAVPEN is FALSE
DEC96 is FALSE
DDIST is FALSE
HEADERLN is FALSE
DMETRIC is FALSE
SOFTRST is FALSE
MSGCMD is FALSE
MSGCAP is FALSE
LRNTPS is FALSE
GPSCHK is FALSE
INTCLK is FALSE
DECSTAT is FALSE
DIGIMY is FALSE
TOSV is FALSE
TALT is TRUE
TSPEED is TRUE
TIMESTAMP is TRUE
TIMEHMS is TRUE
SBEN is FALSE
TSWPT is TRUE
AMODE is TEXT
BMODE is GPS
ABAUD is 9600
BBAUD is 4800
BNKMODE is 0
SSIDROUTE is 0
ALTNET is APTT4
MYCALL is KD4MOT-3
PATH1 is WIDE1-1
PATH2 is WIDE2-1
PATH3 is
TSTAT is /KD4MOT-3
BTEXT is kd4mot-3
BPERIOD is 900
TXD is 100
MTXD is 10
PERSIST is 65
SLOTTIME is 15
QUIET is 10
TRNKMODE is 0
CDMODE is PIN2
CDLEVEL is 10
TXLEVEL is 128
TXTWIST is 50
RXAMP is 14
GWAYLEN is 9
GWAYMODE is NMEA
GRELAYBITS is 1
GRELAYRATE is 0
GKRELAY is 0
LOCATION is 3657.0138N 07989.5980W
GALT is 1000
TSYMCODE is #
TSYMTABLE is /
STATUSRATE is 1
PPERIOD is 900
MPPERIOD is 0
SBSSPEED is 5
SBFSPEED is 60
SBSPERIOD is 1800
SBFPERIOD is 90
SBTANGLE is 27
SBTSLOPE is 255
SBTTIME is 5
MMSG is 0
TSOFFSET is 17
TDAO is 0
TPROTOCOL is APRS
TPSWITCH is 0
TPERIOD is 0
TVOLTTWK is 128
TTEMPTWK is 128
WPERIOD is 0
ALIAS1 is WIDE1
ALIAS2 is
ALIAS3 is
DUPETIME is 30
FILTERCALL is
?
:
Jeff / KD4MOT |
You state ? ?> ... I can see beacons on a handheld but it does not appear to be making it anywhere? ? ?> else. Here is settings. Is your comment in reference to the DIGI attempts, or beacons or both? You do not say what your setup is: ? ?What radio are you using?? Pin2 is uncommon.? Most should be Inverse_pin2. ? ?How does it receive and decode packets? Why do you say it is not making it anywhere else? ? ?Does the HT pick up the DIGI retransmission - if so, the issue is not the TT4. ? ?Or is it not retransmitting at all? 1. Reception and settings for good decode of RF? ? ? ?If you connect a computer to the TT4, do you get god decodes? 2. A matching, unused path element (next element or any unused element if preemptive is set true) ? ? Does the decoded message have an unused path element? 3. Proper DIGI setting (path elemets to match), is there a local station transmitting with a WIDE1 path? ? ? Does the decoded packet match the path for your station to DIGI? 4. TX properly functioning - yes, you say your HT can see beacons- one example. ? ? ?Should not be the problem After that, the RF determines what happens next. Robert Giuliano KB8RCO
|
to navigate to use esc to dismiss