开云体育

Hello. I have two MT4BB units being used as low-current-draw digis on mountain tops. I am having an issue with them working for a few weeks/months/etc then falling off the the face of the earth. We

Has it been powered down for a long time? Try resetting the TT4 by going back in with your PC and check the settings, mine did this once and going back in, re-entering my settings and powering back

Used to work, but now.... Using CALIBRATE get a red/TX light, but no sound heard when monitoring with another radio, no matter what setting. Using MONITOR, no sound heard no matter what setting. I

There's an error, there, its a 30 mile or so gap between digis where nothing is heard.

Hi Mike! Very good to hear from you. The old email is still good but I'll message you the new one that I actually use. What I've had to do down here is use the TT4 as a digi only on a Yaesu 2980 and

Tim Sounds like you are wanting to do what I have been working on to replace the 9 Mile node. Lack of time. I do use the TT4 as a modem between the radio and computer for I-Gate and have a Peet 2100

Hi all, My name is Geoffrey, callsigns F4FXL and KC3FRA, currently living in France. I own 3 TT4 and despite being a TT4 user for quite a while, I am new to the group. John KB7JJG told me about this

Just made the change, thanks. 73, Don

Your request is of an "administrative" type. Please do not post to the Group! Requests of an administrative nature are to be directed to the Group Owner directly at: [email protected] Thanks,

Fastest way to update your email address on all groups.io is to got to: /account </account> & update there. Best regards, *Kevin Potter * *k5vp* [email protected]>

PLEASE CHANGE MY EMAIL ADDRESS TO: W4GCW@... you. ?73, Don ?W4GCW Where am I? Click link below.https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

this did not work. TT4 works great as a digi but no luck at all on PEET weather. Going to do it the easy way. I'll use the TT4 for the digi and the TT3 for weather. Seems to be the only way. If

I'm agreeing on packet mode. I'll try that later today. Cross your fingers, knock on wood, throw a penny over your shoulder. KJ7AZ

For what it's worth, a Tinytrak 3+ is being used to provide tracking in the lead vehicle for the Clarence DeMar Marathon in the Keene, NH area starting at 7am EDT. The callsign being used is WA1YZN-5.

The MTT4BT starts in a bootloader that communicates at 19200 baud (now on either port as of recent firmware). The ABAUD and BBAUD values are used to set the port speed after the bootloader (after

Here is something I noticed which may or may not be of use. This concerns Abaud and Bbaud. Setting Abaud and Bbaud to 2400 causes the TT4 unit to transmit a continuous string of hexadecimal weather

Had to surrender and put the WXTrack back online. I had it working great as a digi but it just wont function for WX with the Peet. I'll keep watching to see if anyone gets lucky or maybe a firmware

OK, Thank You. I got the DIGI up and running without issue. May have to just put the TT3 back online because the weather is more important. Will keep working with it here. Thanks again.

No. We still have some issues. When it is working, it works fine. When it isn't, it is hard to get re-connected. Latest data point.... We also have / had the optional indoor temperature sensor

Did you get this problem resolved? Mine seems to digi ok but it will not read the weather station. This is a before and after. First two lines were using a TT3. Second were using the TT4.