Re: TT4 As iGateUsing A Raspberry Pi

开云体育

Direwolf does all that an much much more.

Keith, WA0?TJT

On Apr 23, 2020, at 1:32 PM, Curt M. <WU3URADIO@...> wrote:

Is anyone aware of any software similar to APRSIS32 that will run on a Raspberry Pi to use a TT4 as an iGate?

Thanks,

Curt M.

Re: TT4 As iGateUsing A Raspberry Pi

#109

开云体育

Do you need maps and client stuff? ?You should be able to compile Xastir for a RPi. ?

David, AC0VH

Show quoted text

On Apr 23, 2020, at 12:32 PM, Curt M. <WU3URADIO@...> wrote:

Is anyone aware of any software similar to APRSIS32 that will run on a Raspberry Pi to use a TT4 as an iGate?

Thanks,

Curt M.

Re: TT4 As iGateUsing A Raspberry Pi

Nigel Johnson MIEEE

#108

开云体育

I am using APRX command line on a pi, but connecting to an OT2 - will probably be compatible with TT4. Can't test as i only have a TT3!

73 de Nigel ve3id

On 23/04/2020 14:32, Curt M. wrote:

Is anyone aware of any software similar to APRSIS32 that will run on a Raspberry Pi to use a TT4 as an iGate?

Thanks,

Curt M.

 

-- 
Nigel Johnson
MSc., MIEEE, MCSE
VE3ID/G4AJQ/VA3MCU

Amateur Radio, the origin of the open-source concept!


You can reach me by voice on Skype:  TILBURY2591

If time travel ever will be possible, it already is. Ask me again yesterday

This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way.
   Nigel Johnson <nw.johnson@...>

    
Please consider the environment when deciding if you really need to print this message

TT4 As iGateUsing A Raspberry Pi

#107

Is anyone aware of any software similar to APRSIS32 that will run on a Raspberry Pi to use a TT4 as an iGate?

Thanks,

Curt M.

Re: APRS Overview - Virtual Presentation

#106

开云体育

Thats great Joe, thanks for letting us know.

Regards,

Doug VK2XLJ

Show quoted text

From: [email protected] <[email protected]> on behalf of Joe Sammartino <jsammartino@...>
Sent: Sunday, 19 April 2020 1:35 PM
To: [email protected] <[email protected]>
Subject: Re: [TinyTrak] APRS Overview - Virtual Presentation

?

Yes, the presentation - including comments - will be recorded. Our host will post it to YouTube soon thereafter and I will post the link.

Thanks again for the question,

Joe, N2QOJ

Re: APRS Overview - Virtual Presentation

#105

Yes, the presentation - including comments - will be recorded. Our host will post it to YouTube soon thereafter and I will post the link.

Thanks again for the question,

Joe, N2QOJ

Re: APRS Overview - Virtual Presentation

#104

Thanks, Doug, for the great question.

I will put the question to our host AG7GK and report back.

Regards,

Joe, N2QOJ

Joe Sammartino

24/7: ?480.270.4563

Mobile: ?480.381.2993

jsammartino@...

Show quoted text

On Sat, Apr 18, 2020 at 8:19 PM Doug J <vk2xlj@...> wrote:

Hello Joe,

Will the presentation be recorded for those of us who can't make it live and say put up on YouTube or Vimeo???

Regards,

Doug VK2XLJ

From: [email protected] <[email protected]> on behalf of Joe Sammartino <jsammartino@...>
Sent: Sunday, 19 April 2020 12:16 PM
To: [email protected] <[email protected]>; tinytrak@... <tinytrak@...>; tinytrak4@... <tinytrak4@...>; microtrak@... <microtrak@...>
Subject: [TinyTrak] APRS Overview - Virtual Presentation
?

APRS Overview - Virtual Presentation

Aaron, AG7GK, will be hosting a presentation on April 21st. This will be a casual overview of APRS on 2 Meters, equipment, tips and tricks, fun stuff, etc.

This will be a video conference but you can just call and/or video conference via phone, tablet, or PC.

Here are the details:

Topic: APRS Overview
Time: Apr 21, 2020 08:00 PM Arizona
Join from PC, Mac, Linux, iOS or Android:

Or Telephone:

Dial(for higher quality, dial a number based on your current location):
US: +1 346 248 7799? or +1 669 900 6833? or +1 253 215 8782? or +1 301 715 8592? or +1 312 626 6799? or +1 646 876 9923

Meeting ID: 287 539 5168
International numbers available:

Or iPhone one-tap (US Toll):? +13462487799,,2875395168# or +16699006833,,2875395168#

Re: APRS Overview - Virtual Presentation

#103

开云体育

Hello Joe,

Will the presentation be recorded for those of us who can't make it live and say put up on YouTube or Vimeo???

Regards,

Doug VK2XLJ

Show quoted text

From: [email protected] <[email protected]> on behalf of Joe Sammartino <jsammartino@...>
Sent: Sunday, 19 April 2020 12:16 PM
To: [email protected] <[email protected]>; tinytrak@... <tinytrak@...>; tinytrak4@... <tinytrak4@...>; microtrak@... <microtrak@...>
Subject: [TinyTrak] APRS Overview - Virtual Presentation

?

APRS Overview - Virtual Presentation

Aaron, AG7GK, will be hosting a presentation on April 21st. This will be a casual overview of APRS on 2 Meters, equipment, tips and tricks, fun stuff, etc.

This will be a video conference but you can just call and/or video conference via phone, tablet, or PC.

Here are the details:

Topic: APRS Overview
Time: Apr 21, 2020 08:00 PM Arizona
Join from PC, Mac, Linux, iOS or Android:

Or Telephone:

Dial(for higher quality, dial a number based on your current location):
US: +1 346 248 7799? or +1 669 900 6833? or +1 253 215 8782? or +1 301 715 8592? or +1 312 626 6799? or +1 646 876 9923

Meeting ID: 287 539 5168
International numbers available:

Or iPhone one-tap (US Toll):? +13462487799,,2875395168# or +16699006833,,2875395168#

APRS Overview - Virtual Presentation

#102

APRS Overview - Virtual Presentation

Aaron, AG7GK, will be hosting a presentation on April 21st. This will be a casual overview of APRS on 2 Meters, equipment, tips and tricks, fun stuff, etc.

This will be a video conference but you can just call and/or video conference via phone, tablet, or PC.

Here are the details:

Topic: APRS Overview
Time: Apr 21, 2020 08:00 PM Arizona
Join from PC, Mac, Linux, iOS or Android:

Or Telephone:

Dial(for higher quality, dial a number based on your current location):
US: +1 346 248 7799? or +1 669 900 6833? or +1 253 215 8782? or +1 301 715 8592? or +1 312 626 6799? or +1 646 876 9923

Meeting ID: 287 539 5168
International numbers available:

Or iPhone one-tap (US Toll):? +13462487799,,2875395168# or +16699006833,,2875395168#

Re: configuring a TinyTrak3

#101

I appreciate everyone's time and advice!

I was guessing my PIC version might be an issue, but I wanted to give it a try.

I'm going to order a new TT3+ kit as well as a built TT4 to mess with.? I'll try the 3+ PIC in my older TT3 and if it's smooth sailing, I'll order 3 more TT3 PIC's for my older TT3's

Again, thanks you and stay safe!

Brad?
KS6R
Peoria, AZ

Re: configuring a TinyTrak3

#100

Rob,

The newest Configuration program, v1.4.6, is compatible with almost every TT3-based product, including? Micro-Trak products. Since Brad said this was a very old TT3, it probably has a PIC 16F644 in it, which does not have a bootloader, so he won't be able to upgrade the firmware without upgrading the PIC to the newer version chip ( Which of course would come pre-loaded with the TT3 firmware) It's about a twenty dollar product from Byonics. You can't just buy the 2 buck chip from Mouser, because the blank chip does not have the Byonics bootloader on it.

73,

Allen AF6OF

Show quoted text

-----Original Message-----
From: Rob Giuliano via groups.io <kb8rco@...>
To: [email protected] <[email protected]>
Sent: Sat, Apr 11, 2020 6:56 pm
Subject: Re: [TinyTrak] configuring a TinyTrak3

I just checked.? It appears there are upgrade options for the TT3 firmware.

You should look into thaf option, and then match the config withe ghe firmware.

On Sat, Apr 11, 2020 at 21:46, Rob Giuliano via groups.io

<kb8rco@...> wrote:

Appears to be a version issue.
The configuation application is for firmware v1.03 and your TT3 has v1.00.

Have you tried TeraTerm or other terminal program and just tried listing the settings?

I am sure there is a luist of commands that can be used in a terminal program.

On Sat, Apr 11, 2020 at 20:41, Brad Shaw, KS6R

<bsshaw1@...> wrote:

Thanks for the response Allen, I appreciate it,

"Send tones" does illuminate the PTT LED until "stop" is keyed.

I set FIFO buffer to off.

I still get the following- TinyTrak3 not found : (TinyTrak3 v1.00) -upon clicking the version button

I get the same results when I click the Read Config button.??

When attempting to write, I still get the read version first dialog box.

I tried many different combinations of port settings with no success.

I also tried it on a different computer with no luck.

I also tried removing and installing the device and driver with no luck.

I am able to see data from a serial GPS through the USB to Serial adapter using a terminal program.

Any other suggestions would be appreciated.

Brad
KS6R
Peoria, AZ

?

Re: configuring a TinyTrak3

#99

Nope. That's just a TT4 thing.

Allen AF60F

I am sure there is a luist of commands that can be used in a terminal program.

-----Original Message-----
From: Rob Giuliano via groups.io <kb8rco@...>
To: [email protected] <[email protected]>
Sent: Sat, Apr 11, 2020 6:46 pm
Subject: Re: [TinyTrak] configuring a TinyTrak3

Appears to be a version issue.

The configuation application is for firmware v1.03 and your TT3 has v1.00.

Have you tried TeraTerm or other terminal program and just tried listing the settings?

I am sure there is a luist of commands that can be used in a terminal program.

On Sat, Apr 11, 2020 at 20:41, Brad Shaw, KS6R

<bsshaw1@...> wrote:

Thanks for the response Allen, I appreciate it,

"Send tones" does illuminate the PTT LED until "stop" is keyed.

I set FIFO buffer to off.

I still get the following- TinyTrak3 not found : (TinyTrak3 v1.00) -upon clicking the version button

I get the same results when I click the Read Config button.??

When attempting to write, I still get the read version first dialog box.

I tried many different combinations of port settings with no success.

I also tried it on a different computer with no luck.

I also tried removing and installing the device and driver with no luck.

I am able to see data from a serial GPS through the USB to Serial adapter using a terminal program.

Any other suggestions would be appreciated.

Brad
KS6R
Peoria, AZ

?

Re: configuring a TinyTrak3

#98

I just checked.? It appears there are upgrade options for the TT3 firmware.

You should look into thaf option, and then match the config withe ghe firmware.

Show quoted text

On Sat, Apr 11, 2020 at 21:46, Rob Giuliano via groups.io
<kb8rco@...> wrote:

Appears to be a version issue.
The configuation application is for firmware v1.03 and your TT3 has v1.00.
Have you tried TeraTerm or other terminal program and just tried listing the settings?

I am sure there is a luist of commands that can be used in a terminal program.

On Sat, Apr 11, 2020 at 20:41, Brad Shaw, KS6R
<bsshaw1@...> wrote:

Thanks for the response Allen, I appreciate it,

"Send tones" does illuminate the PTT LED until "stop" is keyed.

I set FIFO buffer to off.

I still get the following- TinyTrak3 not found : (TinyTrak3 v1.00) -upon clicking the version button

I get the same results when I click the Read Config button.??

When attempting to write, I still get the read version first dialog box.

I tried many different combinations of port settings with no success.

I also tried it on a different computer with no luck.

I also tried removing and installing the device and driver with no luck.

I am able to see data from a serial GPS through the USB to Serial adapter using a terminal program.

Any other suggestions would be appreciated.

Brad
KS6R
Peoria, AZ

?

Re: configuring a TinyTrak3

#97

Appears to be a version issue.

The configuation application is for firmware v1.03 and your TT3 has v1.00.

Have you tried TeraTerm or other terminal program and just tried listing the settings?

I am sure there is a luist of commands that can be used in a terminal program.

Show quoted text

On Sat, Apr 11, 2020 at 20:41, Brad Shaw, KS6R
<bsshaw1@...> wrote:

Thanks for the response Allen, I appreciate it,

"Send tones" does illuminate the PTT LED until "stop" is keyed.

I set FIFO buffer to off.

I still get the following- TinyTrak3 not found : (TinyTrak3 v1.00) -upon clicking the version button

I get the same results when I click the Read Config button.??

When attempting to write, I still get the read version first dialog box.

I tried many different combinations of port settings with no success.

I also tried it on a different computer with no luck.

I also tried removing and installing the device and driver with no luck.

I am able to see data from a serial GPS through the USB to Serial adapter using a terminal program.

Any other suggestions would be appreciated.

Brad
KS6R
Peoria, AZ

?

Re: configuring a TinyTrak3

#96

Thanks for the response Allen, I appreciate it,

"Send tones" does illuminate the PTT LED until "stop" is keyed.

I set FIFO buffer to off.

I still get the following- TinyTrak3 not found : (TinyTrak3 v1.00) -upon clicking the version button

I get the same results when I click the Read Config button.??

When attempting to write, I still get the read version first dialog box.

I tried many different combinations of port settings with no success.

I also tried it on a different computer with no luck.

I also tried removing and installing the device and driver with no luck.

I am able to see data from a serial GPS through the USB to Serial adapter using a terminal program.

Any other suggestions would be appreciated.

Brad
KS6R
Peoria, AZ

?

Re: configuring a TinyTrak3

#95

Brad,

Try using the "SEND TONES" keys. If these work, and force the TT3 to transmit ( Just a red LED in this case), you will know that your cable is working, and that you can communicate with the TT3. You're probably having a serial port timing issue, and I suspect you are using a USB connection? If so, go into the Windows Device Manager, advanced settings, and turn off the FIFO Buffer. Odds are, this will fix your problem.

73,

Allen AF6OF

Show quoted text

-----Original Message-----
From: Bradley Shaw <bsshaw1@...>
To: TinyTrak <[email protected]>
Sent: Sat, Apr 11, 2020 4:06 pm
Subject: [TinyTrak] configuring a TinyTrak3

Having some time on my hands, I dug out my old TinyTrak3 which I hadn't used in years.

Upon powering up (13.8 v) the PWR LED illuminates, the CD and GPS LED flash 3 times, and the PTT LED flashes once.? There is 5 volts at pins 5 and 14.

With only the PWR LED illuminated, I've tried to configure the TT3 using the TinyTrak3config v1.4.6 and I get the following- TinyTrak3 not found : (TinyTrak3 v1.00) -upon clicking the version button.? I get the same results when I click the Read Config button, and nothing populates.? When attempting to write, I get the read version first dialog box.

When using a terminal program, the TT3 reports the same version number when upon power up and when prompted with a ESC V.

Can someone point me in the right direction?

Thanks!

Brad
KS6R
Peoria, AZ

configuring a TinyTrak3

#94

Having some time on my hands, I dug out my old TinyTrak3 which I hadn't used in years.

Upon powering up (13.8 v) the PWR LED illuminates, the CD and GPS LED flash 3 times, and the PTT LED flashes once.? There is 5 volts at pins 5 and 14.

With only the PWR LED illuminated, I've tried to configure the TT3 using the TinyTrak3config v1.4.6 and I get the following- TinyTrak3 not found : (TinyTrak3 v1.00) -upon clicking the version button.? I get the same results when I click the Read Config button, and nothing populates.? When attempting to write, I get the read version first dialog box.

When using a terminal program, the TT3 reports the same version number when upon power up and when prompted with a ESC V.

Can someone point me in the right direction?

Thanks!

Brad
KS6R
Peoria, AZ

Re: Feature Request Tracking

#93

Rob,

I thought it was clear that using the term "old yahoo group", and the fact that I was posting to the new consolidated, .io group that this is the best place to place any questions or comments about Byonics products, but you are quite right, this is the best place to discuss all things Byonics!?

73,

Allen AF6OF

Show quoted text

-----Original Message-----
From: Rob Giuliano via groups.io <kb8rco@...>
To: [email protected] <[email protected]>
Sent: Tue, Apr 7, 2020 3:02 pm
Subject: Re: [TinyTrak] Feature Request Tracking

Allen, You should reference the correct group.? Everything moved to Groups.io - which is where you addressed the message to. <grin>

On Tue, Apr 7, 2020 at 16:30, vhsproducts via groups.io

<vhsproducts@...> wrote:

Bob,

There is no formal request mechanism, but pretty much everything in the Byonics line came about from people asking via the old Yahoo Groups, by email requests, or face-to-face meetings at Ham shows of various species. ( And don't discount offering us baskets full of cash...) I manufacture the Micro-Trak line of products for Byonics, so I can really only directly speak to Micro-Trak hardware issues, but we are here because we are open to what you have to say.

73,

Allen AF6OF

VHS/Byonics

-----Original Message-----
From: Bob Holowenko <holowenko@...>
To: TinyTrak <[email protected]>
Sent: Tue, Apr 7, 2020 11:15 am
Subject: [TinyTrak] Feature Request Tracking

Is there a facility to make feature requests for the Byonics hardware, firmware, and software, which would allow us to track the request acceptance or progress?

Re: Feature Request Tracking

#92

Bob,

? As Allen said, nothing official, but I do consider all requests.? Feel free to email me.

Byon, N6BG

Byonics

Show quoted text

On Tue, Apr 7, 2020 at 11:15 AM Bob Holowenko <holowenko@...> wrote:

Is there a facility to make feature requests for the Byonics hardware, firmware, and software, which would allow us to track the request acceptance or progress?

Re: Feature Request Tracking

#91

Allen, You should reference the correct group.? Everything moved to Groups.io - which is where you addressed the message to. <grin>

Show quoted text

On Tue, Apr 7, 2020 at 16:30, vhsproducts via groups.io
<vhsproducts@...> wrote:

Bob,

There is no formal request mechanism, but pretty much everything in the Byonics line came about from people asking via the old Yahoo Groups, by email requests, or face-to-face meetings at Ham shows of various species. ( And don't discount offering us baskets full of cash...) I manufacture the Micro-Trak line of products for Byonics, so I can really only directly speak to Micro-Trak hardware issues, but we are here because we are open to what you have to say.

73,

Allen AF6OF

VHS/Byonics

-----Original Message-----
From: Bob Holowenko <holowenko@...>
To: TinyTrak <[email protected]>
Sent: Tue, Apr 7, 2020 11:15 am
Subject: [TinyTrak] Feature Request Tracking

Is there a facility to make feature requests for the Byonics hardware, firmware, and software, which would allow us to track the request acceptance or progress?