开云体育

Hi all,

I'm thinking of creating my own version of the Option 02 PCB for my AFG5101, but the service manual seems a bit lacking in parts lists... Only showing part details for PCB A1 (Option 02 is PCB A5)

The schematics seem to have the needed part details for all parts except Transistors Q900, Q901, Q902, Q903, IC's U905, U914, and Crystal XTAL900.

Here's a link to an image showing the locations of the parts:


Can someone who has this option in their AFG5101 pull the board out and let me know what the part numbers for these parts are?
Some photos of the parts and the entire board would be greatly appreciated too, if possible.

If I'm successful in replicating this option PCB, I'll release the gerbers and BOM for others to use too.


Thanks!
Jared.

Hi,? Still searching for the information on this option board if anyone has one?? Thanks!

Do you have a pdf of the manual you could put in the files section?

Thanks
--
T. Gerbic
Central California

You can find the manuals here, I haven't found any more info that what is in this link:

Guess I should have remembered to look there first...

As a last resort, you may need to look at the schematics from some other signal generators of that era and look for the same looking pin-out device. See if there is a part number for that. Transistors might just be general purpose, and crystal footprint generic so should not stop the design of a board, like the ICs would. Someone will eventually pop up with the values.
--
T. Gerbic
Central California

I've managed to source the info I need, special thanks to the member who opened up their unit! :)