开云体育

Chuck Bravo pour le préciser réponse As always, you are the expert in 246x/A/B! Bon Soirée Jon PS...Still struggling with the 2467B with bad CTTOPT. Lab in Paris has just Hameg 102, 302 analog

Why not?? U800 is just a 24 Pin DIP, of course it can be replaced, I've done dozens of them.

Is it possible your fan is bad.? Those AC fans just use bronze bearings which can get loud when they dry out. I cringe a little when loud fans are simply replaced with quite ones as if that is the

I'm interested but despite going through the help section I have no idea how to PM you. John

It's a prop in many movies, the 1980 made-for-TV adaptation of The Lathe of Heaven has a scope that I think was a Tek. In one of the Teminator sequels there's a 500 series just incidentally, the video

Thank you !Bernie Schroder

Just for anyone who is interested, links to the book are in the blog post https://www.eevblog.com/forum/testgear/free-book-on-tektronix-oscilloscopes/ http://www.k100.biz/parade.htm Seems a lot of

I have 2 TDS460A scopes. they both take quite some time to boot.? I have not timed them, but 1 minute sounds about right.

Sorry, it actually also is a 460A. And indeed it has option 13 and 1M. It sounds like it's in good shape? Radu.

I have a TDS460A with the 1M option and it takes a while, basically like a PC with a digitizer. Sam Reaves ARS W3OHM Owner / Moderator of: LeCroy Owners Group on Groups.io Sencore Owners Group on

Actually, the HP54522A takes just about 5-6 seconds before it's up and running. [email protected]> wrote:

Hi all, I recently repaired a TDS460, but I am a bit taken aback by its about 1 minute 10 seconds boot time to fully up - is this normal? My HP 54522A takes a mere maybe a dozen seconds to being able

WVR500 controls are easy to break was there a modification or part number of a replacement ever released? -- Jeffeelcr

Risetime and BW are related but NOT the same! Read the TEK Vertical amplifier circuit concepts book. Your choice Depends on the desired max RT/BW being tested. We found the Best is the Leo Bodnar 40

http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=124&products_id=303Lives up to the spec on my sampling scope.Reinhard Metz?Sent from my Verizon, Samsung Galaxy smartphone

For ~300ps into 50ohms, have a look at https://www.eevblog.com/forum/testgear/show-us-your-square-wave/msg1902941/#msg1902941 To get a reasonable edge, decoupling is critical. Another simple

The Leo is about the best thing going off the shelf and comes validated on his 11801. A 284 is also good but I still waiting on doing an aliment on those for the lab. The 70ps edges are hard to deal

I've got the BNC version of this: http://www.leobodnar.com/shop/index.php?main_page=index&cPath=124 I'd bet a lot of us have at least one of them.

Hi, I am trying to put together a test device to check the BW of my scopes. Can anyone suggest a simple module or design that would do the deed without costing the earth ?? I probably need a rise-time

https://testequipment.center/Products/Tektronix-015-0672-50