开云体育

It occurs to me that, if I am going to unbind my 7934 manual (re-binding is a pain) to scan pages 6-22 and 6-23 in order to update the copy on TekWiki, it would be useful to know if there are any

Jon, the newer RG223/U cables have a lot more flexibility. -- Jeffeelcr

Hello again" BEWARE that CAL requires Exact TEK test equipment Caled test scope and probes Experience with CAL proceedures, VERY steep learing curve for first timere DANGER: HOR K IC U800 is EASY

Hello: All photos CANNOT be added to a message in this group. Kindly visit /g/TekScopes2/photos Create a new album title, descr Then add the LINK to the new album here Jon

Hi. LEMO still make them: https://www.lemo.com/int_en/solutions/originals/s-indoor-stepped-insert/era-0s-304-cll.html (Part number obtained from the tekwiki page, and searched for with

Hi David Nice to hear that I will try to download Thanks for info. Regards Saroj <david.partridge@...> wrote:

Check the Japanese connectors from Hirose, they made cross version of the Lemo. Jon

The TekWiki site page at https://w140.com/tekwiki/wiki/LEMO_S-series_connector one will find a list of Tektronix units that use those Lemo connectors. DaveD KC0WJN [email protected]> wrote:

My intended point was that a scrap or "spares" 1101 or 1101a could also provide the needed connectors. Chuck Yahoo Mail - Email Simplified

Bill, You don't need the separate supply; you can just add the power jacks to the 2465B.? They were available as an option (option 22, I think), and the connections for them are already present on

Another source would be a Tek 1101 or 1101a probe power supply. Yahoo Mail - Email Simplified On Fri, Mar 14, 2025 at 4:33 PM, bill K7WXW via groups.io<K7WXW@...> wrote:

Wondering if anyone who has a "spares" 465, 475, or 485 would be willing to pull a couple of the LEMO power jacks from the back (the four pin jackused to power Tek probes that use +/-15VDC) for me.

You can DL the 2465B manual direct from tek.com and that is a very high-quality PDF. D. Sent: 14 March 2025 01:29 To: [email protected] Subject: Re: [TekScopes2] 2465B with no trace

Dear Jon Thanks for your response. I had downloaded the manual from the site manualslib couple of days before and downloaded the manual from the site you described. It seems little difficult to follow

Hello again dear Sir, See W140/ tekwiki for all Tektronix manuals in PDF Also the Vintage Tektronix Museum Manual you need is service, for the the serial number and exact model, options Artek has

Hi Jon Thanks for the info. By the How can I get the manual from you? Regards Saroj

Thank you Roger for the information

Hello, 0/ get full service manual for your model and serial 1/ be sure all LVPS are correct V and noise, hum in spec 2/ on 2465B check A5 control bd for leaking SMD electrolytic se damages. 3/

/g/TekScopes , it was the original TekScopes group and TekScopes2 is a later offshoot. Roger

Hi Roger Thanks for your kind response. OK I will go there. Could you tell me how do I get there? Is it totally different site? Regards Saroj