开云体育

See my last post,.? I? included two options for the fans I have used in the past.? .

Hi, I'm looking for a Tektronix 015-0672-50 50 Turn Current Loop to suit a TCP202 current probe. Picture attached for reference. If anyone has one of these they are willing to sell and ship to Japan,

I was hoping for some model numbers, Thanks!! .. The fans in TM506 and TM5000 series main frames are just too loud...

I used the ETRI 141 Series Fan.? The 141-LV 0282 fan is EXTREMELY Quiet @ 28.0 dbA 55Cfm @ 1700 rpm and 1.9 mm Hg pressure.? There is a slightly louder version in the 141-LT 0282 somewhat louder @

> > I found a direct replacement fan that is very quiet. ?It was originally > used in a CNC machine. ?I will need to look up the specifications when I > get to the house. ?I don’t keep all those

a fan regulation, controlled by the output air temperature, would be nice. Maybe the air flow of the original fan is known. The max. output air temperature at original air flow could be determined by

Roger, I have two TM5006 that had the same issue. I swapped the 110V fan against a 220V model, plug&play. With this mod the unit is close to silent with an airflow largely sufficient for normal

Add series power resistor or ( if AC fan) plastic cap to drop voltage. beware of the airflow, if in hot location or high power load plug-ins. Jon

Dear all, My TM5003 fan seems like a jet plane taking off… Is there a quieter option I could use as replacement? I have seen a video of a guy that has replaced a TM5006 fan (110V) with a much

Tek in the movies! This time its a 1982 Chuck Norris vehicle, 'Silent Rage' .. in which a medical renegade tries a life after death serum on a murderer shot dead by the Sheriff. Tektronix 547 50MHz

I don't post much if at all-- but I couldn't help this one-- I was always horny for two vintage TEK scopes-- the 556 dual beam and finding the first TEK scope I had ever seen, touched and played

Jennifer: Welcome to the group. That is an impressive collection of hardware. Had most of the same except for the 7104 and the curve tracers prior to downsizing due to space limitations and

yes indeed....I owned ( note the past tense) 2 tek 475 so I could have 4 channel capabilities when rarely needed but it started as a back-up.....now 8 different varieties some rescued from going to

The number of parts scopes does not count, just like calories on a vacation. Harvey

I am not a collector, that's what we all say. Someone who is not a collector owns one scope.? ;-)

---- Congratulations for the repair. Ozan

Also a critical note of the 577 calibration. If you are running in to difficulties in getting the vertical alignment to converge STOP and run through the procedure on the 177 its self. It has a

It seems I made a typo... The number I provided for the Instrument Interfacing guide was actually for the Instruction Manual (that I have...) Here are the correct numbers: Instrument Interfacing Guide

Excellent, glad to see that it works now. Harvey