Re: What's the Tektronix part number for a dead spider
Spiders in the plugins? That's nothing! I don't think mine would work without the spiders and the stinkbugs. For me, it is usually some critter trying to pimp my ride with modifications to the vacuum
By
Chuck Harris <cfharris@...>
·
#168805
·
|
Re: What's the Tektronix part number for a dead spider
Found him, thanks. 73, Dick, W1KSZ ________________________________ Sent: Monday, June 29, 2020 8:04 AM To: [email protected] <[email protected]> Subject: Re: [TekScopes] What's the Tektronix part
By
Dick <w1ksz@...>
·
#168804
·
|
Re: What's the Tektronix part number for a dead spider
Ah, yes! It looks like it has fallen in love with a Posidriv screw-head. Perhaps there are more and would they have different part-numbers dependant on where they are?
By
Colin Herbert
·
#168803
·
|
Re: What's the Tektronix part number for a dead spider
I stopped looking when I found a spider husk in the lower left, near second row from bottom of front panel knobs/pots. probably two of 'em. -- John
By
John Griessen <john@...>
·
#168802
·
|
Re: What's the Tektronix part number for a dead spider
Look 210mm from the front panel and 91mm from the base. I think it may have been trying to calibrate some function..
By
Colin Herbert
·
#168801
·
|
Re: What's the Tektronix part number for a dead spider
I think it's sitting on a green-ish pot(?) just to the center/right of the picture. Thanks, Barry - N4BUQ
By
n4buq
·
#168800
·
|
Re: What's the Tektronix part number for a dead spider
Where is it located ? 73, Dick, W1KSZ ________________________________ Sent: Sunday, June 28, 2020 10:41 PM To: [email protected] <[email protected]> Subject: [TekScopes] What's the Tektronix part
By
Dick <w1ksz@...>
·
#168799
·
|
D34 ghosting blur
https://photos.app.goo.gl/8esDSfBZB6YwKGjQ9 Hello to the group, Any suggestions what could be causing this sort of blur which is modulated by the signal? It's strange fog. When I had this Telequipment
By
Ondrej Pavelka
·
#168798
·
|
Re: What is the differences between Tek P6021 and TCP202 current probes?
For Tek probe questions I refer all to Tekprobes group. Some very savvy probe folks there¡. Steve Lindberg Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
By
Steve Lindberg
·
#168797
·
|
Re: Tektronix 2230
Hi leo Thanks once again for guiding me through repair process. Regarding the voltage issue you are right that my power supply has poor regulation. As you suggested I will try my best to replace those
By
Saroj Pradhan
·
#168796
·
|
RIFA madness (Re: [TekScopes] 2215 CRT problem, PSU filtering?)
They are more likely to explode when fed 230 V ~, and that is often what comes with 50 Hz (I know, not in east Japan, Jamaica, Cura?ao, Bonaire, Barbados, and a few parts of other countries). If they
By
Carsten Bormann
·
#168795
·
|
Re: Tektronix 2230
Hello Saroj, this is a good start! You confirmed your scope has the typical issue, it's almost always the primary power supply with problems. The Power Supply are basically TWO switching inverters
By
satbeginner
·
#168794
·
|
Re: 2215 CRT problem, PSU filtering?
Hi Tom, Sorry, yes you're correct, that'll teach me for posting late at night! Unfortunately, I don't have access to an ESR meter, however the need for one arises often these days so perhaps it's time
By
Maxsimmonds1337@...
·
#168793
·
|
Re: What's the Tektronix part number for a dead spider
That spider is definitely screwed :-) Rick
By
momemeca
·
#168792
·
|
What's the Tektronix part number for a dead spider
Can you see it? http://w140.com/tekwiki/images/1/10/1s1_left.jpg I thought it was funny.
By
Snappy
·
#168791
·
|
Re: Tek Purchased Power Supplies, Power One
https://lmgtfy.com/?q=tekwiki&pp=1
By
Jay Walling
·
#168790
·
|
Re: Tektronix transformers question
Thank you, the RPR catalog was most helpfull! Sendt fra min iPhone
By
Thomas S. Knutsen
·
#168789
·
|
Re: (OT) repair tools: Autotransformers/variacs
Hi, Roy. I'd be interested in your diatribe on variable autotransformers. I have a Staco model 500B autotransformer that I rescued from the trash at work (Raytheon). Yes, it can go up to 140 VAC on
By
Jim Ford
·
#168788
·
|
Re: Tektronix transformers question
Rick, Here you go. 120-0117-00 is a Power Transformer for a 310A The RPR catalogs are available at TEKWiki. Follow this link: https://w140.com/tekwiki/wiki/Main_Page then type "RPR" in the SEARCH box.
By
Michael W. Lynch
·
#168787
·
|
Looking for a good, late R7603
I'm after a late R7603 and am in no hurry. I want one with a fan. I'm about to buy some service info so will be better able to spec what I think I want. How. ever. there must be 50 people here who
By
Bill Perkins
·
#168786
·
|