Way to go Markus! That is one fine scope.
toggle quoted message
Show quoted text
--- In TekScopes@..., Markus Peterson <auerillies@...> wrote:
I truly appreciate the information that I have gotten from everyone. Today
I followed around with my dmm and looked for the lowest ohms and found one
cap that matched my shorted ohm reading on the 15v rail. So I decided to
replace it and look at what we have!
Now time to verify some calibration as the manual suggest, but for a
student with his AA and with intent to get my BSEET degree o think my first
scope has been a large learning oppurtunity and now I have a working 475a
to start troubleshooting other stuff.
Also to the people who suggested applying current to the circuit and using
a voltage to frquency convertor, I looked into the circuit and will be
constructing a tool to use in future troubleshooting. Again I thank you all
for your help and will continue to be an active member here and try to
contribute as much as I can.
