I have a 179 bench DMM also. I usually leave it running because I'm always using it to check this and that.
I also have a 147 Nanovolt Null Detector. After I capacitor-discharge welded all the crimp connections, it works well AFAICT but I don't have the cable and it turns out I'm not enough of a volt-nut to make proper use of it. I'd rather have a 155 or an HP 419 or a Fluke 845.
Dave Wise
________________________________
From:
[email protected] <
[email protected]> on behalf of jmr via groups.io <jmrhzu@...>
Sent: Saturday, May 4, 2024 6:24 AM
To:
[email protected] <
[email protected]>
Subject: Re: [TekScopes] Keithley anyone?
I've got a Keithley 2015THD DMM, and I also have a basic Keithley 2000 DMM. I've also got one of the Keithley 2200 programmable power supplies plus another 2200 that needs to be repaired.
I usually operate all of these remotely via GPIB although the 2200 also supports USB.
