Dennis, do you know the appropriate finish hole size in the PWB for each of these replacement sockets?
Larry
toggle quoted message
Show quoted text
On 3/3/2021 11:02 AM, Dennis Tillman W7pF wrote:
Hi Dave,
These are the ones I use with their corresponding DIgiKey and Mouser part numbers:
Mill-Max Part Numbers
917-93-103-41-005000 CONN TRANSIST TO-5 3POS GOLD
0552-2-15-01-11-27-10-0 CONN PIN RCPT .015-.020 SOLDER
0552-2-15-15-11-27-10-0 CONN PIN RCPT .015-.020 SOLDER
All three of these are still available from DigiKey.
Mouser Part Numbers
575-055220 Mill-Max 0.015-.022¡± pin, 0.170¡± deep, for small transistors & small in-line pkgs.
575-0293015 Mill-Max 0.022-.034¡± pin, 0.170¡± deep, for TO-66 transistors
575-031400 Mill-Max 0.032-.046¡± pin, 0.236¡± deep, for TO-3 transistors & large in-line pkgs.
Only two are available now from Mouser.
Dennis Tillman W7pF
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dave Peterson via groups.io
Sent: Wednesday, March 03, 2021 10:34 AM
To: [email protected]
Subject: [TekScopes] PCB sockets for plug-in xtors/etc.
Is there a resource for the sockets that are soldered into the PCB boards in scopes with plug-in transistors, ICs, diodes, etc.?
Dave
--
Best wishes,
Larry McDavid W6FUB
Anaheim, California (SE of Los Angeles, near Disneyland)
