开云体育

Jim, NY State is one of my favorite places to fly.? It was such a big surprise to me when I first started traveling out there for business.? That was BT (before Tailwind).? Being from the

Red, Probably pretty hard to see but there is a pin at? your airport.? That trip was one of my favorites.? Thanks again for your guidance and hospitality. Keith

127 airports in NY State. I probably missed a few. NJ next.

Sounds and looks great Keith Red Sent: Monday, January 27, 2025 11:50 AM To: [email protected] Subject: [TailwindForum] Trip Map idea. Hi Everyone, My friend Rick with whom I take

Pin Map-I have 49 airports and landing strips just in the western half of NY State. NY/NJ metro area probably a dozen that closed long ago. There is a location in Albany area where one could take

Very impressive Keith, I can only be envious, start a book/autobiography. You have really used your little Tailwind to its' fullest extent.?Thanks for sharing and may your "EPIC ADVENTURES"

Hi Everyone, My friend Rick with whom I take? EPIC Adventures,? took a large USA aviation map and put a flag on each of the airports that he stopped at over the last 30+ years flying his RV4.? ?I

I used 1/2" -? ?491-8D.? The metal shroud is part of the 491 fitting.? Definitely review the EAA? video on hose fabrication.I bought my oil cooler from Vans aircraft.? It was less expensive

School is a high probability tool for escaping poverty if applied with ambition and a plan to do so. It worked for me and 3 more of my 7 siblings. I tried to screw it up but failed. School without a

Thanks. [email protected]> wrote:

I have fitted a BMW car oil kit made in china which has now been past by the LAA cost for cooler hoses and fittings ?126 including a thermostat

The problem with trying to learn a skill just by reading is you don’t know when you are creating bad habits and doing it wrong. That is where schools come in. Experienced people (hopefully) to guide

That is when I pretty much decided I was done with school. [email protected]> wrote:

Found it. [email protected]> wrote:

Jonathan Livingston Seagull was my first Bach book, I think I was 10. The Messiah book I was introduced to 10 years later was Illusions: The Adventures of a Reluctant Messiah. That’s the one with

Thanks all! Looking at Aeroquip 303 hoses and 491 fittings. But what size? 1/2"? 38"? 1/4"? Should I add the metal shroud to the hose OR must I buy hose with shroud manufactured on it? Kevin

I recently paid over $2500 for tubing to build a W10., and I drove to Wicks to pick it up. I think I will have almost all I need. May be a few pieces short. ??♂? [email protected]>

Thanks Dennis? I will try those.? I have the springs you first listed and like Keith says, they are a little loose.? I wonder how the heavier ones will do with turning tight since their maximum

Thanks Dennis for the great drawings and update.? Just as an FYI,? I increased the size of the main tube and also the inside pushrod from 1/4" to 5/16".? Here is a link to my description of the

I visited the aeromart at Oshkosh religiously while building my Tailwind, got a complete set of Cleveland wheels and brakes and tubes and tires (all brand new, never unboxed) for $350.00, just got