开云体育

Do it! Mine looked fine but when I took off the glass I found the bolts were more than half gone. Head off a disaster. Marty Marty Levenson Registered art therapist 604-928.4033

My boat is right near chainplate express. He is the the guy I used to fix the centerboard. But my chainplates are still enclosed in fiber glass. I have been thinking of opening them up. A can of worms

Agreed that 316 is best, but 316 will still rust slightly if the imperfections aren’t polished out. My problem is that the boat is in Malaysia so it’s hard to find the same quality and standards

If you can get them in 316 that would be prefered

Weird question, but if anyone has an old set I’m needing them to send to a shop in Texas that will use them as a template for new ones. Airport security didn’t want me flying back with my set in

Jeremy, I’m at Ivy club now at slip C14. Stop by and we can compare notes. And draft won’t be a problem. —Bill Ackerman Duette #327

Looks like I am going to arrive at Peoria tomorrow. Planning for IVY. I think the draft should be ok. I'm probably at 3.5 feet right now with the centerboard up. Then I need figure out my plan to some

Here is a photo tribute to Russ (I think this was circulated awhile back, or at least I came across it trying to learn more about him awhile back): https://www.youtube.com/watch?v=Bvm62ImCQOc Brent

For all those who wanted to see these unique additions. FREE to anyone who will remove !

John, thank you. John Sent from my iPad

John, As requested , here is photo of appendage on Hygelig .??? FREE to anyone who will remove them ! Boat guys here did great job on boot stripe !?? Failed to sand prior to painting ! | | | | |

I’m planning on 8 hours per day. I have an Atomic 4,too. Re noise, shouldn’t be like a B-52. Is it cavitation get, or maybe exhaust noise? I should be in Peoria tomorrow and weekend. Let me know

How many miles per day are you planning on doing. I should be passing by your place in hull #154 in a few days. I am only looking to be underway four or five hours per day for the most part so only

Planning on a river trip from Peoria IL via Tenn-Tom route to Mobile, then on to Tampa area. Anybody interested in joining me for part or all of the trip? #327 Duette

The only thing I have to add is a light countersink in the holes will help the Butyl tape do its job. The DYI info from compass covers everything very well.

I think the switch on the 27-2 to windows that open was a huge improvement. I don't know if the holes are the same size. Monica Malone monicam@...

Butyl tape/puddy. Sent from my iPhone

Used a 1/4" stone grinding wheel to clean the corrosion out of the inside of the aluminum =| Can't find in my notes the size of the window glazing (rubber between the glass/plastic and aluminum

And here is the link to the website Warren mentioned:https://shop.marinehowto.com/t/bed-it-tape Every boater should have a look at the projects shown there. CalebT27 #328

I have a 1965 T 27 hull #130 and there were no gaskets. I rebeded mine with butel tape. I unassembled the portal; outside aluminum extrusion, inside extrusion, barrel nuts and lense. I put the outside