开云体育

Hull 593 has a hinged mast. The mast was cut about 8 inches above the deck and a hinge inserted. We expected to need stays on the boom but they carried no load when lowering. Doubled the topping lift

Hello Jeremy, Oh OK. The two models do have many very subtle differences. You are welcome! Good luck on the project! Fred

Fred, I looked into this option more. I have a much older boat with an external lead keel. For that design there is barely any clearance between the lead keel and the centerboard where the pennant

I have considered that approach. One advantage of that solution is that it makes it easier to remove the centerboard for painting or other maintenance without having to cut and recrimp. On the other

When I do mine, I put a thimble on both ends of the wire, then use the appropriate oval? sleeves, making sure the wire sticks out at least one diameter of the wire.. From the eye w/thimble I found a

Ahoy! I am inching ever closer to having a working solution. I have one more question. How small should I make the loop at the end of the cable? For some reason that I do not understand, I am supposed

Of those who might have the Farymann diesel, has anyone experienced carbon buildup at the exhaust elbo?? I see where this is a problem on other diesel engines

So far nobody has said they wanted to buy it. Just asked questions. I dont even have a price for it. Open to suggestion. You can use rickg1952@... if it is easier. Thanks, Rick

I could be second inline for the tiller head if lm53187 doesn't take it. Mine is worn but working. -- Carl Damm DAMSELv 1976 #593 Stuart Fl

OK, thanks anyway.

Yes

Do you have this mechanism that goes on the end of the boom? https://photos.app.goo.gl/mdCWsgEUMkrrkXmm9 - jeremy

The cockpit sole is sold. Sorry. rickg1952@... [email protected]> wrote:

Rick, I had asked about the teak cockpit sole. Is it available? What would you ask for it? Thanks!

That I have. I havent priced it. If your interested I will gladly. Thanks, Rick

What about the fitting/connection between the rudder post and tiller?

No rudder. It would have been an excellent part to keep but couldnt under the circumstances. Sorry. Rick

Teak sole grate?

Rudder? -- Carl Damm DAMSELv 1976 #593 Stuart Fl

Hank on