开云体育

Jeremy, I think Warren has pointed out why it might not be so easy to just upgrade the size of wire rope (thanks Warren). My information.html (file in the files section) says that the centerboard

I think the limiting factor may be the size of the hole at the edge of the center board. At least on my centerboard, there is a hole crossways, i.e. oriented as the hole for the pin; but there is also

Hello, What size wire do you use for the centerboard pennant. I originally ordered the replacement cable from Tartan, but it seems it is only 1/8". That has a working load of 340lbs and a breaking

I've seen the hose reducers -- but I am not quite sure I understand how best to use them. It seems useful for connecting a large rigid tube to a smaller rigid tube. But if you are trying to go from

I just filed down a red brass tube to fit inside the existing tube. The OD of the insert is now 0.834" or 21.18mm. This is the tube I used,

I can confirm that the chaffing is definitely worst at the top and bottom of the tube. [email protected]> wrote:

Anything to reduce friction is good; but the real abrasion issue as I understand it isn't the pennant in whatever tube it's in.? Instead, it's where the pennant exits the tube at the bottom, inside

Does someone know the dimensions of the inside of the tube. I am looking at a product called alumina. It is highly abrasion resistant . It actually comes in tube form . Was thinkig of sliding one tube

The original hose was heater hose.? Marine exhaust is an excellent choice.? Also consider silicone exhaust and corrugated exhaust hose.? All have their good points.? I always use exhaust hose for

Pegasus hose reducer Silicone PN SR38.25-BLACK

Flex Tape as seen on TV, It is ridiculously sticky. You really only get one shot.? Dressing it with a canvass (sunbrella) cover is ideal for long life and cosmetics. -- Carl Damm DAMSELv 1976 #593

Ralph, Here are some links to pictures of the salon table: /g/T27Owners/album?id=103968/g/T27Owners/album?id=103926&p=Created,,,20,2,20,0 Caleb D.T27 #328

hi my 27 had a carpet on cabin deck and no table when I got it. It has fitting for pipe recessed in deck floor. if anybody could help with instructions and specs to fabricate table and how table is

Thank you All for your input i appreciate all your help, ive got an idea of what i need and need to do now.

Rob, Similar story here re h'cane Bob.? My parents had bought a wooded lot in East Hampton before I was born and my father built us a summer house there so I had been summering in that area most of

Another book which is a fun story of a true character fixing up and his sailing a 27' cruiser around Massachusetts Bay, Cape Cod, and the Islands is Peter Baumgartner's "London Goes to Sea: Restoring

Yeah, I remember Hurricane Bob. My gf at the time and I were on our way to the Cape, stopped in on a whim to see Jimmy Buffett at Greatwoods in Mass. He had brought his sailboat up to the Cape, and

Robert, It may or may not have been me who recommended this book but I did read it many years ago when we first got our T27.? It was quite inspiring to read and really made me want to be able to

Just ordered The Coast of Summer by Anthony Bailey, 4 bucks and change from Abe Books, shipping included. Read the first 70 odd pages on a preview. Thanks to whomever mentioned the boat and book here,

Sent: Friday, January 17, 2020 10:48 AM To: T27Owners Moderator <T27Owners-owner@...> Subject: Tartan 27 For Sale Classic 1969 Tartan 27 Hull #412, Great Lakes Boat! Located in Sturgeon