开云体育

Hello All Am owner for past four years of Hull #154, a yawl. I have an older 170 furling genny, and am thinking that is too much sail here in the fall days on Lake Michigan. Does anyone have a smaller

fill rail. attached a location Sounds like the resistance would be less, but you would still need air to release out above the 90 against the water incoming. The only other problem could be expansion

I recently aqquired hull #442. The information I have indicates a fill tube on deck with a overflow/vent to the hull just below the toe rail. I have a fill tube on deck, however just below deck there

They were Perko lights on my boat. West Marine sells Perko but I don't know if they sell the lenses separatly.

I was just emailing a friend some photos of how I rebuilt my Atomic 4 and thought it may be useful to other T27 owners out there. It's posted in the "Photos" section under "Tartan27plee"

Does anyone know of where I can obtain the red and green globes for runnning lights? I have an older Tartan, #83, vintage 1964. Thanks Neville

If you are interested in owning one of the nicest Tartan 27's around, check out our completely restored and updated 27-2 on boats.com. It is 'Random' sailed out of Ossining NY on the Hudson river.

Boy do I feel silly. I was at the boat today and the screen size is correct. If they are still available. What do we do next?

a Thanks for the offer. Wish I had 5X12's that opened. The ones I have are much smaller and oval in shape.

Thanks for the input fellas. I'll do some research on the G10 and the starboard is a good idea as well Caleb. Didn't think about that approach. Shapeable, sandable, dont' have to seal the edges,

On the advice of an experienced boat repair guy here in Vancouver I used a piece of .5" plywood, approx 6" x 8". I painted all edges with epoxy first to seal the wood. When I drilled the stantion

While I agree with Marty L. and his approach to using 1/2" plywood and epoxy coating I think that there are other alternatives to metal backing plates. One fellow I know of makes his own out of cloth

A fiberglass product called "G10" is very good for these applications. It is a very heavy duty and non-corrosive fiberglass sheet that machines and cuts well. It has been used in the custom

Chris, The same backing plate issue is on my list right now. (Stantions only) Having just finished re-coring the deck it is clear they should have been included originally! I've got a friend who has

Hi everyone, Has anyone put backing plates on their stantion bases and deck cleats? If so, did you make them yourself or purchase them. I know I can cut some out of 1/8" stainless or aluminum but I

Yes, I have screens for give-away. See my posting #174 from August 9, 2007. Jack Wyman 1978 T27-2 Hull #667 Seakindly (for the time being)

I have mine mounted amid ships off the cockpit. On the starboard side. I use the WM collapsible with the brackets that are permanently mounted. I keep it out of harms way in the aft lazarette. I added

We found that mounting our cheap swim ladder (< $100) amid ships where our spinnaker pole is mounted works pretty well. A bungee cord or two on the top of the ladder and even a boat fender lashed

looking or a quality SS transom ladder or T 27 . With the reverse shear transom std ladders dont work. Searching internet for sources not luck. Any auggestions of ladder sources.

any info on replacing toe rails? with wood or rubber? armando hull 555 ____________________________________________________________________________________ Got a little couch potato? Check out fun