Hi Scott,
Most likely all your condensation is actually collecting inside the
insulation making a nice mess of things, and leaking out.
Unfortunately the way the icebox is mounted (glass tabbed) makes it
very difficult to redo the insulation. You'll end up cutting it out
any way. also the Stainless liner is very thin and probably wouldn't
survive the redo. A drip tray would only be a bandaid and not fix the
problem. I installed a 3 locker pantry (2 uppers and a large lower)
with the upper left locker still being accessed through the cockpit
hatch. I can fit a small cooler for drinks and such in this locker.
You can make the locker larger to fit a larger cooler.
Best of luck,
Bob
SV Gabba Hey
1964 #90
--- In T27Owners@..., "Scott Kendall" <thephoenix215@...>
wrote:
Does anyone have a solution for the condensation that forms on the
bottom of the AFT port icechest on the bottom which ends up
dripping
down on the port berth down by the engine? I have seen some folks
remove the dry storage cabinet and icebox all together to make more
room in cabin, but has anyone come up with an insulation method or
drip tray to funnel this moisture to a drain?
