开云体育

Nice L/R Indicator.? ?40? untested.

Odd additional marking, maybe an early ILS setup? or such. Ben

sorting out my spare tubes. if anyone needs 55 tubes let me know. send messages direct. Ben

This is a big ongoing project thst is half complete. It involves the following: 1. The top tank tuning capacitor is converted to split stator by using threaded nylon rod to hold the vanes and putting

This is a big ongoing project thst is half complete. It involves the following: 1. The top tank tuning capacitor is converted to split stator by using threaded nylon rod to hold the vanes and putting

I was the sunday morning net operator in an ATC squadron in the '50s using 1154/1155. I have just always loved these radios,, but they have quirks Here are 2 simple things you can do to an R1155 to

Derrick |D Thanks for the reply Ben. Yes, plenty of info on the web, but as my 1155N came to me in pieces, there are a few issues identifying parts, wire routes etc.( I didn't have the luxury of

Derrick |D Thanks for the reply Ben. Yes, plenty of info on the web, but as my 1155N came to me in pieces, there are a few issues identifying parts, wire routes etc.( I didn't have the luxury of

Lancaster T1154 trailing wire reel? ?120 Type D key? ?80

Many sites on the web with full info on the R1155 sets. google is a handy tool. Ben,

Hi, have just joined the group as I'm in the process of rebuilding a R1155N receiver, and looking for relevant data and documents. Derrick

Hi, have just joined the group as I'm in the process of rebuilding a R1155N receiver, and looking for relevant data and documents. Derrick

The rearranging has allowed me to open up the Italian Spy set, Nova, for display at last. The West Wing has a new member of staff now. www.militarywirelessmuseum.co.uk (

OK, long shot but has anyone the aerial fixing unit fitted to the bottom of the trailing wire bracket? or one they can photo in hi-res so I can try and make one?

and a couple more.

Great sets.

Ok, no R numbers on this cct so still unsure which R is u/s.? Anyway, good luck with it.? Ben

Thanks Ben, just checked my wiring on power supply and is correct for biasing resistor from 30V- to earth 5k 25w adjustable as in diagram.The resistor that burned out was R3 not R4 Sorry

The HT neg does not go to ground but is above gnd so giving the heg bias. See pic.? The audio amp is not needed, I simply use an o/p transformer wired backwards and an l.s. to it, more than enough

Hi All, I have just about come to the end of my R1155 restoration; haven't used it since the late 8o's I don't know what happened to the original power supply I made for it at the time, probably