A few photos of the inside of a Sunfish can be found posted in the
Files section of this discussion group.
Photos show two of the points where Sunfish sometimes develop leaks,
the Mast Step and the Dagger Board Trunk. You can also view how the
forward foam blocks are positioned and attached.
Wood blocks used to back some of the deck hardware are also visible
in a couple of the photos. In some shots you can see the heavy weave
fiberglass cloth (woven roving) used to construct this hull.
This particular Sunfish is a 1979 AMF. Not all editions of Sunfish
are constructed using the exact materials seen in this boat, but they
are all put together similarly.
Adding an inspection port is recommended to help keep your Sunfish
dry and in good repair.
Instructions for installing an inspection port can be found on the
Wind Line Sails website. www.windlinesail.com (Thanks Dan)
