开云体育

Where to go for parts!

Kraig Ecton All Messages By This Member #17287 We rescued an old sunfish that was lost in a garage for years and we are now bringing it back to life!? Preliminary inventory shows that an inspection port on the rear deck between the tiller and cockpit is missing its cover and the daggerboard is missing its clip.? That's all I see for now.? But where can I go to get replacements?? Unsure about the integrity of the sail and ropes, will be checking those out later this week. Any help is much appreciated!
Signal Charlie All Messages By This Member #17288 Annapolis Performance Sailing has a good selection of ports, or West Marine
Brian Willis All Messages By This Member #17289 I have found that a lot of places the last few years have had trouble stocking parts. The only place I have had consistent luck with parts is sunfishdirect.com? toggle quoted message Show quoted text On Tuesday, July 9, 2019, 11:32 PM, fourbg@... [sunfish_sailor] wrote: ? We rescued an old sunfish that was lost in a garage for years and we are now bringing it back to life!? Preliminary inventory shows that an inspection port on the rear deck between the tiller and cockpit is missing its cover and the daggerboard is missing its clip.? That's all I see for now.? But where can I go to get replacements?? Unsure about the integrity of the sail and ropes, will be checking those out later this week. Any help is much appreciated!
Hugh Gardner All Messages By This Member #17290 Intensity Sails has alot of parts Sent from my Verizon Motorola Droid
Mark Kastel All Messages By This Member #17291 开云体育 It's a shame we have lost so many competent dealers over the years due to the dysfunction with the current manufacturer. ? A prominent stocking dealer, with a lot of knowledge (owned by active Sunfish sailors/racers) is: ? The Dinghy Shop in Amityville, New York. ? MAK ? Mark A. Kastel Kastel@... 608-625-2042 ? toggle quoted message Show quoted text From: sunfish_sailor@... [mailto:sunfish_sailor@...] Sent: Wednesday, July 10, 2019 7:39 AM To: sunfish_sailor@... Subject: [sunfish_sailor] Re: Where to go for parts! ? ? Intensity Sails has alot of parts ? Sent from my Verizon Motorola Droid
John Owens All Messages By This Member #17292 I have rudders, daggers, tillers, and the daggerboard spring. John Owens J O Woodworks / B & L Ram Pumps 903-894-6293 870 County Road 3812 Troup, Texas 75789 jowoodworks@... john@... On Tuesday, July 9, 2019, 10:36:02 PM CDT, lewis.kent@... [sunfish_sailor] wrote: ? Annapolis Performance Sailing has a good selection of ports, or West Marine
Thomas Payne All Messages By This Member #17293 Do you sell the little wooden bits that go at the top of the daggerboard? With the cutouts for your fingers to grab? I need four of those is you make them. Tom? On Wednesday, July 10, 2019, 9:47:57 AM EDT, John Owens jowoodworks@... [sunfish_sailor] wrote: ? I have rudders, daggers, tillers, and the daggerboard spring. John Owens J O Woodworks / B & L Ram Pumps 903-894-6293 870 County Road 3812 Troup, Texas 75789 jowoodworks@... john@... On Tuesday, July 9, 2019, 10:36:02 PM CDT, lewis.kent@... [sunfish_sailor] <sunfish_sailor@...> wrote: ? Annapolis Performance Sailing has a good selection of ports, or West Marine
John Owens All Messages By This Member #17294 Are you talking about the old style daggers? John Owens J O Woodworks / B & L Ram Pumps 903-894-6293 870 County Road 3812 Troup, Texas 75789 jowoodworks@... john@... On Wednesday, July 10, 2019, 09:34:19 AM CDT, Thomas Payne thomas3452@... [sunfish_sailor] wrote: ? Do you sell the little wooden bits that go at the top of the daggerboard? With the cutouts for your fingers to grab? I need four of those is you make them. Tom? On Wednesday, July 10, 2019, 9:47:57 AM EDT, John Owens jowoodworks@... [sunfish_sailor] wrote: ? I have rudders, daggers, tillers, and the daggerboard spring. John Owens J O Woodworks / B & L Ram Pumps 903-894-6293 870 County Road 3812 Troup, Texas 75789 jowoodworks@... john@... On Tuesday, July 9, 2019, 10:36:02 PM CDT, lewis.kent@... [sunfish_sailor] wrote: ? Annapolis Performance Sailing has a good selection of ports, or West Marine
Thomas Payne All Messages By This Member #17295 Exactly, the wooden daggerboards have two wooden pieces at the top, one on each side. They are the same no matter the shape of the board.? On Wednesday, July 10, 2019, 12:47:40 PM EDT, John Owens jowoodworks@... [sunfish_sailor] wrote: ? Are you talking about the old style daggers? John Owens J O Woodworks / B & L Ram Pumps 903-894-6293 870 County Road 3812 Troup, Texas 75789 jowoodworks@... john@... On Wednesday, July 10, 2019, 09:34:19 AM CDT, Thomas Payne thomas3452@... [sunfish_sailor] wrote: ? Do you sell the little wooden bits that go at the top of the daggerboard? With the cutouts for your fingers to grab? I need four of those is you make them. Tom? On Wednesday, July 10, 2019, 9:47:57 AM EDT, John Owens jowoodworks@... [sunfish_sailor] wrote: ? I have rudders, daggers, tillers, and the daggerboard spring. John Owens J O Woodworks / B & L Ram Pumps 903-894-6293 870 County Road 3812 Troup, Texas 75789 jowoodworks@... john@... On Tuesday, July 9, 2019, 10:36:02 PM CDT, lewis.kent@... [sunfish_sailor] wrote: ? Annapolis Performance Sailing has a good selection of ports, or West Marine
Signal Charlie All Messages By This Member #17296 I think if there was more interest in dinghy sailing, there would be more parts and more dealers and a robust manufacturer. I am amazed there is a new parts source at all.? Kent toggle quoted message Show quoted text On Wed, Jul 10, 2019 at 8:30 AM 'Mark Kastel' kastel@... [sunfish_sailor] <sunfish_sailor@...> wrote: ? It's a shame we have lost so many competent dealers over the years due to the dysfunction with the current manufacturer. ? A prominent stocking dealer, with a lot of knowledge (owned by active Sunfish sailors/racers) is: ? The Dinghy Shop in Amityville, New York. ? MAK ? Mark A. Kastel Kastel@... 608-625-2042 ? From: sunfish_sailor@... [mailto:sunfish_sailor@...] Sent: Wednesday, July 10, 2019 7:39 AM To: sunfish_sailor@... Subject: [sunfish_sailor] Re: Where to go for parts! ? ? Intensity Sails has alot of parts ? Sent from my Verizon Motorola Droid -- Kent B. Lewis (850) 449-4841

Previous Topic Next Topic