|
New group for mini lathe users Open for other topics on using your new tools around the home and other hobbies Like the good olds /g/minilathe/messages Dave
|
|
I've got a Heavy 10L restoration project sitting here on hold for other reasons, but I tripped over this source of custom belts for SB lathes on a link from another forum and totally different subject. These may be the folks who sell on ebay, but I don't know for sure. They also mention Atlas lathes. I've not seen an Atlas that uses flat belts, but not by any means an Atlas expert, either. HTH! https://www.squirreldaddy.com/South-Bend-Atlas-Lathe-Parts-s/12.htm Bill in OKC
|
|
The old 3 jaw chuck on my SB10K started jamming up. Even when backing out the jaws. Thought it was just swarf but couldn't get it running right even after cleaning. Time to tear it apart for "deep cleaning". Then I noticed the pinion was broken out at all four corners. It was pretty worn when I got it a year ago but it finally broke. The chuck is likely a 1970's vintage as is the lathe and well, no longer supported by Buck. Internet searches and inquires turned up Kalamazoo Chuck Manufacturing which still makes parts for and supports the older Buck Chucks, and probably more. The nice lady (Dawn) at the other end of the computer was really helpful and got me set up with a new pinion and chuck key. I probably didn't need the key but was so grateful for the support I bought a new one anyway. The outside jaws were missing from this lathe when I bought it and Dawn said they can even make me a new set of jaws and gave me a price. All the prices seem high at the onset, but when you think about what it takes to make these parts it really isn't that bad. Especially compared to tossing the chuck and buying a new one. Cleaned, lubed and reassembled the chuck is once again smooth as silk. Since it is the acu-tru it was easy to dial back in. Now running with half a thou indicated with repeatability of about .001". I'll take that any day for an old machine for a rank amature like me to play with! I have no connection with KCM except as a happy customer. Hopefully this will help someone else with an orphan Buck Chuck. Stuart
|
|
restauration sanches blanes
5
my difficulty is in dismantling the lathe tree. I uploaded the photos in a new topic. Regis
|
|
|
|
Moderators need
6
We need Moderators for this group does any want help Dave
|
|
New files uploaded to Southbendmanual@groups.io
4
Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the Southbendmanual@groups.io group. /4) Tooling/Taper attachment plans.pdf /4) Tooling/SlotAttachment.pdf /4) Tooling/MetricThreading37~47.pdf Uploaded By: davesmith1800 <davesmith1@...> Description: Shop made tooling Cheers, The 开云体育 Team
|
|
New file uploaded to Southbendmanual@groups.io
2
Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the Southbendmanual@groups.io group. /4) Tooling/TailstockDailHolder.pdf Uploaded By: davesmith1800 <davesmith1@...> Description: Dial for tailstock Cheers, The 开云体育 Team
|
|
New files uploaded to Southbendmanual@groups.io
4
Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the Southbendmanual@groups.io group. /_1939 Specifications for Workshop Lathes A B&C.pdf /Face Plate Locking Means 1964 Patent.pdf /_1928 J.E. Beggs Co Ad.pdf /non-postal-rates-hmo.pdf /_V_belt cone pulley info.doc /Taper Attachment Fitting Instructions pg3.pdf /_Form 2002 Headstock Spindle Sleeve Bearings 10 to 16 in.pdf /_Why the South Bend Lathe works so well /_Form 908C Parts List Headstock 10 through24 4-5-65.pdf /_Later 10-L with Steel bench, Outline and Dimensions.pdf /_South Bend Lathe 10K.pdf /_Installation and Leveling of the lathe (H3).pdf /_914C.pdf /_Cleaning up a spindle and bearing by Dennis Turk.doc /_Form 938B Parts List HL-Tool Cross Slide 9-10k-H10 11-15-64.pdf /_Form 937C Parts List Handlever Turret 9 through 13 11-15-64.pdf /_follower rest ver 2.pdf /_Index_Plate_9A_.pdf /_South Bend Indexing Centers. Parts List, NDX-100.pdf /Taper Attachment Fitting Instructions pg4.pdf /Taper Attachment Fitting Instructions pg2.pdf /_ATT. 212-208 Fitting Replacement Screws.pdf /_Form 1038 Care of machine tools not in use.pdf /_Form 983B IMPORTANT4-5-65.pdf /_Machine_Shop_Estimates.xls /_South Bend serial numbers.xls /_SBparts&MaintMan.pdf /Needle thrust bearing used to replace the fiber washer.docx /SB 9A & 10k Bull Gear Plunger (Pin).pdf /Assem_54[1].pdf /_948C.pdf /_906H.pdf /_Lubrication Chart for Heavy 10 from Sandy Khalili.pdf /_South Bend Indexing Table, Parts List, RTB-100.pdf /Assem47[1].pdf /_belt splice instruction.pdf /_Accuracy_test_report_on_10K.pdf /drawer_materiales_47[1].pdf /_1How_to_Run_a_Lathe_South_Bend_Lathe_1of2.pdf /_How To Grind Lathe Tools compressed.pdf /Modified Feed Screw.pdf /_Buffing parts By Dennis Turk Word 97-2003.doc /_bearing numbers by D. Turk.doc /_Fitting chuck and faceplate to SB 9.doc /_912E.pdf /_tooling dimensions sb_7324.pdf /Taper Attachment Fitting Instructions pg1.pdf /_405 gearing set up.pdf /_South Bend Lathe Accessories.pdf /_2125074_PHOTOELECTRIC_MACHINE_TOOL_CONTR.pdf /_Post WWII SB Angle Iron Bench.pdf /_2010Black_and_white.pdf /_Form 2000 Maintenance Back Gear and Eccentric 10-1-65.pdf /_925_926_2H.zip /_910c.pdf /_Form 921F Parts List, Belts, Lubrication. Pulleya 4-5-65.pdf /_1936 - How to Grind Valves - Bulletin 1A.pdf /materiales_54[1].pdf /_SBL Workshop Bed Length by Cat Number.pdf /_Form 2001 Maintenance Back Gear& Eccentric13&16-4-5-65.pdf Uploaded By: davesmith1800 <davesmith1@...> Description: Files from old site Cheers, The 开云体育 Team
|
|
New file uploaded to Southbendmanual@groups.io
6
Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the Southbendmanual@groups.io group. Uploaded By: davesmith1800 <davesmith1@...> Cheers, The 开云体育 Team
|
1 - 10 of 10
Image Name
Sat 8:39am
Sat 8:39am