Taper Cover Heavy 10-10 L
开云体育Here we go.? Dimples are now 0.125” out the bottom and 1.25” apart centered on the hole. ? ? From: [email protected] [mailto:[email protected]] On Behalf Of Jim V via groups.io
Sent: December 28, 2023 8:12 PM To: [email protected] Subject: [SouthBendLathe] Taper Cover Heavy 10-10 L ? here's a better pic with dimensions for the Alignment Indentations, which I missed on the 1st try.? Specs are from my Heavy.? The indentations are 5/8" center to center of the hole.? (looks like I'm?getting?a D+ in drafting today) LOL ? |
开云体育John, ? Many thanks! ? Have been following the messages, and my 10L doesn't have that cover either. Info is much appreciated. ? Cheers, and a Very Happy New Year to you and all the other members! ? TonyS ? From: [email protected] [mailto:[email protected]] On Behalf Of John Dammeyer
Sent: Friday, December 29, 2023 5:24 PM To: [email protected] Subject: Re: [SouthBendLathe] Taper Cover Heavy 10-10 L ? Here we go.? Dimples are now 0.125” out the bottom and 1.25” apart centered on the hole. ? ? From: [email protected] [mailto:[email protected]] On Behalf Of Jim V via groups.io ? here's a better pic with dimensions for the Alignment Indentations, which I missed on the 1st try.? Specs are from my Heavy.? The indentations are 5/8" center to center of the hole.? (looks like I'm?getting?a D+ in drafting today) LOL ? |
开云体育BTW if anyone wants it as an Alibre AD_PRT file of this I can send that. John ? ? From: [email protected] [mailto:[email protected]] On Behalf Of nzpropnut
Sent: December 29, 2023 12:12 AM To: [email protected] Subject: Re: [SouthBendLathe] Taper Cover Heavy 10-10 L ? John, ? Many thanks! ? Have been following the messages, and my 10L doesn't have that cover either. Info is much appreciated. ? Cheers, and a Very Happy New Year to you and all the other members! ? TonyS ? From: [email protected] [mailto:[email protected]] On Behalf Of John Dammeyer ? Here we go.? Dimples are now 0.125” out the bottom and 1.25” apart centered on the hole. ? ? From: [email protected] [mailto:[email protected]] On Behalf Of Jim V via groups.io ? here's a better pic with dimensions for the Alignment Indentations, which I missed on the 1st try.? Specs are from my Heavy.? The indentations are 5/8" center to center of the hole.? (looks like I'm?getting?a D+ in drafting today) LOL ? |
|
Late the the game here and apologies if the answer has been stated but; can this be modified to fit the 9/10k taper attachment as it is quite different from the 10L,R etc. Thanks
On Friday, December 29, 2023 at 12:11:44 AM PST, nzpropnut <skilton.adscan@...> wrote:
John, ? Many thanks! ? Have been following the messages, and my 10L doesn't have that cover either. Info is much appreciated. ? Cheers, and a Very Happy New Year to you and all the other members! ? TonyS ? From: [email protected] [mailto:[email protected]] On Behalf Of John Dammeyer
Sent: Friday, December 29, 2023 5:24 PM To: [email protected] Subject: Re: [SouthBendLathe] Taper Cover Heavy 10-10 L ? Here we go.? Dimples are now 0.125” out the bottom and 1.25” apart centered on the hole. ? ? From: [email protected] [mailto:[email protected]] On Behalf Of Jim V via groups.io ? here's a better pic with dimensions for the Alignment Indentations, which I missed on the 1st try.? Specs are from my Heavy.? The indentations are 5/8" center to center of the hole.? (looks like I'm?getting?a D+ in drafting today) LOL ? |
