开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

TA cover


 

开云体育

Here's a slight variation on what others have posted regarding their TA covers. This is on my13". Two features that are useful are the slight bend on the close end that allows it to ride up over the cross slide and second the hinge (5.25" from the locking handle) which allows one to back out the cross slide all the way to the end.


  


 

I like that!? May do that to mine.
--
1969 16" x 6' South Bend Lathe
Garage full of old Mopars........


 

开云体育

Sorry, don't understand the need for the hinge. You turn the single piece cover end for end when it gets in the way or fails to cover enough. If designed correctly, it covers all the slot for all the travel.


Eddie




------ Original Message ------
From: "Bob Durst" <BobD@...>
To: "SBLathe" <[email protected]>
Sent: Friday, 29 Dec, 23 At 17:53
Subject: [SouthBendLathe] TA cover

Here's a slight variation on what others have posted regarding their TA covers. This is on my13". Two features that are useful are the slight bend on the close end that allows it to ride up over the cross slide and second the hinge (5.25" from the locking handle) which allows one to back out the cross slide all the way to the end.