开云体育

I started this eGroup last week and look at the great information.
Keep it coming...........

Lets see some more pictures.

Alright here is my 9" SB that has been with me off and on since 1969. The
first picture shows the lathe turning a part mounted in the 3" 3-jaw from my
7x10 with a custom aluminum backplate. The chipguard is flipped back for
this picture. 2" dial indicator depth stop above the gearbox. Phase II Enco
tool post. RF-20 mill drill to the right behind the lathe. 7x10 on the bench
to the left, bandsaw on the bench to the rear of the lathe. Second picture
same view with faceplate on to line up the milling vice for cutting a keyway
in a shaft. This time 7x10 is under the left bench.
JWE