I bought collets for a SB-10Heavy. However, they turned out to be SB-3 collets for a SB-9.

That's why they are for sale.

Trading for a SB-10-Heavy drawbar to fit SB-2 collets is also an option.

In the meantime, I was able to buy SB-2 collets. I'm still looking for a drawbar for them.

greetings,
Ruud

(The Netherlands)

mailto:calciu1@...
?
?

According to this SB picture, the SB-3 is equal to the 3C collet usable on a SB9. On the white paper picture are the available collets SB-3.
One of the 10mm collets is a non SB collet but fits SB-3 drawbar. Same threath and demensions.

For a SB-10-Heavy I need the 2A or SB-2 collets.?
2-A = SB-2
3-C = SB-3
4-C = SB-4
5-C = SB-5

?

Hi There,

?

I take it you have a 10R type Heavy Ten (with the 1-7/8" x 8 tpi

spindle).

?

I have a lot of those 2A (a.k.a. SB 2).? I have three 10R's and this is

the size collet they use.? I also have some of the spindle adapters

they use (#4 Morse to 2A) if you need one.? I don't think I have

any metric 2A collets if that is what you are looking for.

?

Good Luck!

-Blue Chips-

Webb

?

Hi,
I own a set of metric collets. Just looking for a drawbar for SB-2 (2A) collets.

greetz,
Ruud

?