I received this kit, assembled without much trouble and it works fine connecting to AllStar nodes. However, I can't get EchoLink to work.
Specifics are below. Does anyone have suggestions?
73 Jim.
asterisk -rvvv
echolink dbdump
0|VE3LMK-L|198.48.247.18
663717|*PINGTEST*|52.91.249.47
9999|*ECHOTEST*|54.176.61.77
This looks like too short a list.
module show like echolink
Module Description Use Count
chan_echolink.so echolink channel driver 0
So the echolink module is loaded but is not being used.
I have forwarded ports: 4568 UDP, 5038 TCP, 5198 UDP, 5199 UDP, 5200 TCP.
(iax.conf contains bindport=4568 because 4569 is in use for my PBX.)
My echolink.conf looks like this (comments & password removed):
[el0]
confmode=no
call=VE3LMK-L ; Change this!
pwd=xxxxxxxxxx ; Change this!
name=Jim Lemke ; Change this to your real name!
qth=Orillia ON ; Change this to your actual QTH!
email=ve3lmk@... ; Change this!
maxstns=20
rtcptimeout=10
node=893614 ; Echolink node number - Change this!
recfile=/tmp/recorded.gsm
astnode=62464 ; Change this to your active Allstar node number!
context=radio-secure
server1=server1.echolink.org
server2=server3.echolink.org
server3=server2.echolink.org
server4=backup.echolink.org
freq=446.1
tone=110.9
lat=44.615697685914995
lon=-79.43942928795009
power=0
height=1
gain=3
dir=8
message=Low power local link for HT\n
