开云体育

I sent him a email so we will see if I get a reply from him… Thanks, Scott Scott Svare Global Press, Inc. 206-369-7040 globalpress@...

HiFi Engine has the P102 service manual. Craig

Hi dear, I have these manuals (owner and service). I have a lot of manual at?http://library.rclabs.com.br. Specific SAE P102 manual was a guy from here that donated to me. Great guy! In the web site

Good morning—new member here. Also a new owner of an SAE P102, T102, and E101 parametric EQ. In searching for a manual for the preamp, I sent a couple of emails to Jim over the last several weeks,

2013-01-06 RIP James Thanks Mark, for being his friend, must have been a whole adventure. Diego Gil >

It was a cold and dreary day in January of 2013, when I was notified that James Bongiorno had passed away. That day the Audio Industry lost a pioneer who contributed much to the ever growing

I replaced u6 not u8. u6 is closest to the jacks and it's the first chip to receive input.

{\rtf1\mac\ansicpg10000\cocoartf824\cocoasubrtf410 {\fonttbl\f0\fswiss\fcharset77 Helvetica;} {\colortbl;\red255\green255\blue255;}

File : Searching the archives.doc Description : A how to...plus some gotchas you need to know.

This is an automated message sent upon subscription and as a Monthly reminder. Revised 6/17/04 Mark Gurries ======== LIST RULES ========== This list has a set of rules governing the discussion topics

Manuals, Part Cross References & Schematics...ect: http://groups.yahoo.com/group/SAE_Talk/links http://groups.yahoo.com/group/SAE_Talk/files Repair/restore/rebuild Shops:

UNSUBSCRIBE INSTRUCTIONS You have two ways to unsubscribe from this list. FIRST: 1) Sign in to http://groups.yahoo.com/mygroups. 2) Select Edit My Groups. 3) Look for the Group you wish to Unsubscribe

Manuals, Part Cross References & Schematics..ect: http://groups.yahoo.com/group/SAE_Talk/links http://groups.yahoo.com/group/SAE_Talk/files Repair/restore/rebuild Shops:

for another update I replaced u8 thats the 4136 chip closest to the audio jacks that was giving the scope explosions and the unit now is working properly but now I need to work on the audio jacks. The

I'm trying to work out the wrinkles with my p101 premap. It has been sitting, and the sound was distorted. I cleaned all of the relays, and initially there was still some noise, but gradually things

I have some for a 2400 but then your 2400 will be missing handles. :) Craig

the sd214 is the one I couldn't figure out on the schematic it's sae numbers I guess for those. I tried searching the actual numbers on the components and I also tried d214 with no luck so that one

Thanks Rick, only one of those SAE #s is on the handy dandy SAE cross reference chart. The "S" is missing on the schematic for the SD214. That was the only one I couldn't find, I'll look again now

Hi, here is some info on the parts used in the 5000, SAE#11-0165 are RC4136 quad opamps, (U4,U5,U6,U7,U8) on schematic, SAE#11-0164 are LM339 comparators, (U1,U2,U3) on schematic, SAE#11-024 is a

another update on this. I tried snipping the negative and positive voltage input pins on u6 but could only snip the positive one but I was still getting some signal with no input so I removed u6