开云体育

FYI Attachments (Photos or schematics eat..) are not permitted on this list for spam and virus protection purposes. Please send photo directly to the person or post them in the photos section of

The eject issue is the belt hardened into its normal resting position. Replacing the belt fixes it . . .

I just grabbed another D102 on Ebay. Perfect working display. Only issue is "Sometimes it won't eject"...No biggie. It is a earlier model with no digital out....oh well. Maybe I can swap everything

I tore the D102 apart tonight. I looked at the display module. I resoldered many joints. No work. The module covers all that isn't working, but again, as you are aware, all the functions work great.

Again, the Repeat LED and Index LEDs don't light. I doubt they are part the said Display module. Almost like the pcb isn't getting power. Haven't torn it apart yet. David

FWIW, I have two C-101 Cassette Decks, that needed both belts and idler tires. I found that the transports are either Matsushita (w/Mitsubishi motors) or Mitsubishi. The one resource that might be the

Thanks. I had read somewhere it is the display driver IC that fails, and according to the service manual the hex inverter driver IC is a LS7404 which can still be found. Guess I will pull the front

I do not have photos, I do have the schematic. I appreciate your help. Sent: Monday, August 5, 2019 3:12 PM To: SAE_Talk@... Subject: RE: [SAE_Talk] Searching for Information if you

There are three belts, one for the slide drawer is easy the other two are sketchy. Sent: Tuesday, August 6, 2019 9:20 AM To: SAE_Talk@... Subject: [SAE_Talk] Re: Searching for

Joe, if you could post a picture, or sent it to me in an email, I think I can help you out. I worked on a ton of cassette decks from that era, and it’s likely SAE used a mechanism that was also used

Joe, if you could post a picture, or sent it to me in an email, I think I can help you out. I worked on a ton of cassette decks from that era, and it’s likely SAE used a mechanism that was also used

if you still haven't gotten the info by Thursday I'll help out with pictures. I have three units - one of which is in daily use, so I'll take photos first, then take the 2nd apart to see where the

Thanks for recommendations and advice on service for Mk XXX and XXXI. I'm in good hands. Jim M

Thanks for the reply. I have found a set of belts, my problem is how do they go in around the idlers. There seem to be two for the drive. I was hoping to find a picture of them installed. Sent:

If you have the old belts, you can start with measuring them. Broken belts after being cleaned can be glued end to end with super glue to help make the measurement. What you want is to measure the

Craig is a great technician. He’s repaired 4 of my components. Couldn’t be happier. Joe --

Jim, I have have good success with Craig Tathwell, Apple Valley Audio repair in Apple Valley, Ca. as he not only repairs but knows the recommended upgrades for them. He’s done three for me with good

Hi Jim... Both of those units are excellent products and continue to perform well even though they are vintage Bongiorno Designs. As one of JamesB's primary Service Centers we would be more than

Do you have any info or photos of the display, board and board modifications? Those displays were made by someone and likely were a “standard” part with others likely to have same or similar

That should be several XXXIBs. Craig